The kitchen and bathroom were covered with polished tiles that fell off and loosened not long after,

There are many reasons for this phenomenon, which may be the cause of the tiles themselves, it may be that the wall is not pre-treated during the construction process, or it may be that the tile adhesive is not used.

The reason for the brick itself. The essence of polished tile belongs to a kind of full-body brick, which is different from full-body brick, and polished tile needs to polish the surface of the tile on the basis of full-body brick. Polished tiles also have the characteristics of high density and high hardness.

Overall,The water absorption rate of polished brick is very low, if it is used as wall tiles, it can not quickly absorb the moisture in the sand and ash and bond it together, and the lack of adhesion leads to the phenomenon that the wall is easy to loosen and fall off. This is one of them.

In addition, if the wall is not pretreated before paving, it will also loosen and fall off. A responsible master prepares the wall tiles before they are laid. First of all, the vertical leveling of the wall:

The patch should be made, the knock should be knocked, and then the wall should be brushed. Finally, let the wall "drink some water" firstThe purpose is to prevent the wall from absorbing too much moisture from the sand and ash layer, resulting in insufficient water for the tiles to drink.

Thirdly, the tile adhesive is not used when paving. Ceramic tile back coating glue is a kind of ceramic tile paving accessories developed to solve the problem of tile hollowing and falling offAfter the test of the market, the back coating glue has a significant effect on solving the problem of tile hollowing and falling off Now it is accepted by the majority of consumers, and generally choose large bricks to process on the wall, in order to prevent falling off, they will choose to coat the back of the glue. Another reason is that there may be no reserved joints, and the thermal expansion and cold contraction will cause the tiles to arch each other, so that the phenomenon of loosening and falling off will occur.

I didn't stick it when I posted it, so it is recommended to re-do it, otherwise it will be ugly to fall off.

It may be that it was not installed properly when it was installed, so this kind of problem occurs.

The phenomenon of the tile falling off and loosening is that the tile is not firmly pasted when the tile is pasted.

The polished tile is falling off, which is a problem with the way it is pasted.

When the tile is pasted, it should not be flattened and not installed, so it is loose.

There is a problem with the quality of the adhesive in the gap, or it is not installed properly during the renovation.

First, the technology is not good

When we decorate the kitchen, if there are tiles falling down, it must be that the master we ask for bad technology, so this will not happen, if you want to find a good technology, the master to decorate your own kitchen, In this way, this phenomenon will not happen, now there are a lot of masters who decorate the house, we must have a lot of experience to decorate the house for ourselves is the best, otherwise this situation will occur, so that we will find the master to redecorate, so that not only the waste of materials or the waste of money, so that it is not good for us.

Second, the wall is hollow

When we decorate the house, if the tiles fall, maybe our wall is hollow, so that the tiles will fall, we have to make the falling tile wall must be covered up by me, so that this will not happen, and then the tiles can be pasted , so that the life of use is particularly long. We have to clean up the wall surface of the hollow valley, and then mix the tile adhesive, apply it evenly on the back of the tile, and wipe it out with a special tooth shape, the shape of the stripe, and then gently press the tile on the hollow drum part, and then use a hammer to beat it to fix, and wait until 24 hours after it is fixed, you can carry out the caulking procedure.

3. Repair according to the situation.

The kitchen tiles in our home fall off, which is the last thing we want to see, if it falls, look at the size of the area that falls, if the area is relatively small, we can use tile adhesive to repair the specific method, You can first pry the loose and falling tiles off the wall, and then we apply a layer of glue on the back of the tile, and then paste it so that it is done, in fact, this is a very simple way.

When we decorate the kitchen, we must find a skilled worker to help us do it, and the house to be renovated will be clean and beautiful, if we find a worker with poor technology to do it, then our follow-up project is still very large, so it will make us waste money.

It's because the master didn't install it, or this situation wouldn't have happened.