What should I do if the location of the bathroom basin is far away from the hot and cold water outle

You have to see whether your wash basin is a countertop basin or a column basin, 1. The countertop basin will first install the hot and cold water inlet pipe and drainage pipe on the basin, and put it directly on the countertop, and then connect the water inlet pipe to the wall triangle valve, and the drainage pipe is connected to the sewer pipe, open the valve to release water to see where there is no water leakage, and fasten it, and if there is no water leakage, the glass glue is put on the countertop last week, and it can be so after drying. >>>More

The reason why there are three holes is because there is more than one type of mixing faucet, there are three independent connections combined, such as the hole in the middle is installed with the water outlet, the holes on both sides are installed with cold water switches, hot water switches, the link of the mixed water is combined together with a connecting pipe under the basin, some basin drains have a movable cover, the cover is connected with a connecting rod, the connecting rod is directly behind the faucet, and the pull-out type, this pull rod is installed in the hole in the middle, so it is necessary to make a three-hole basin, a general-purpose basin, As for the spill (the overflow, which is the round hole in the façade in the recess on the inside of the basin), that is the real overflow.

Lengthen the basin hose or install the basin in a different position.

Hello, the advice for you is 1Turn on the faucet switch on the top of the basin and rotate it to the direction of hot water; 2.In the case that the orange line of the water supply pipe is normal and the electric water heater is working normally, if there is no water flowing out of the faucet, the water inlet switch belonging to the electric water heater is not opened, and the water inlet switch can be turned on. >>>More

1. Bathroom wash basin size.

Bathroom basin size. >>>More