-
Anonymous users2024-01-23Bathroom waterproofing, generally we will directly recommend the use of mortar waterproofing agent, not only with the base surface sticky firm, but also high puncture resistance can be with the same life as the building, the use of the method.
1.Clean the construction site and sprinkle water to make it fully moist but there should be no stagnant water.
2.Wall: The total thickness of the waterproof layer (waterproof mortar + waterproof mortar) is not less than 10 mm for the wall, not less than 20 mm for the ground, and not less than 1800 mm for height.
1) Mix "Lauyer mortar waterproofing agent" with cement at 1:3 to form a waterproof mortar, and paint it once or twice on the base surface, with a total thickness of 2 mm.
2) After 20 minutes, after the waterproof mortar is dry, stir it into a waterproof mortar with "Laoyal" and cement and sand according to 1:2:6, and wipe it on the surface of the waterproof plain ash with a thickness of 8 mm.
After the waterproof mortar layer is solidified, it is cured by sprinkling water.
I don't know if he understands what he said upstairs, silicone can not be soaked in water for a long time, plus non-woven polypropylene cloth is two oil and one cloth is commonly used in the protective layer can not be used as a protective layer to prevent cracking. It is recommended to make the best water-resistant polyurethane coating on the bathroom floor for a long time, and it is difficult to hang the side wall if it is made of polyurethane cement, and the side wall does not need to be soaked in water for a long time, and it is recommended to do JS polymer cement coating with a ratio of 3:1 that can directly stick to the bricks. Hope to adopt.
Since it is used in the bathroom, it is necessary to choose non-toxic and odorless environmentally friendly waterproof materials, and obviously water-based waterproof coatings are a good choice. But even if it is a waterproof coating, it is necessary to look for the brand and qualification certification. Here is a recommended one for you: Anhui Langkaiqi waterproof. >>>More
Roman building materials are good, their characteristics and advantages: >>>More
To do waterproofing, you need to do it on the surface of the water, and you can do it yourself. >>>More
Bathroom waterproofing is done on the base surface to start doing, generally brush twice waterproof paint (synthetic polymer polyurethane waterproof coating), that is, waterproof is to be done before the tiles, if not done, which can only remove the tiles to do waterproof and then paste the tiles!