When the bathroom is waterproof, why should the corners of the ground and the wall be pasted with me

Updated on Bathroom 2024-05-02
6 answers
  1. Anonymous users2024-01-23

    Don't listen to how good the waterproof cloth is blown, this and professional waterproof materials can not be compared, may make the landlord spend money but did not achieve the waterproof effect, it is recommended to let it replace the regular waterproof material for waterproof operations.

  2. Anonymous users2024-01-22

    Did you read that right? Is it mesh cloth? Although the mesh cloth has the effect of preventing cracking, it is not used in the bathroom!

    Bathroom waterproofing, it needs to be 20 cm on the ground, the corner of the wall and the wall contact with the waterproof material directly covered, and even if there is a collapse in that place, the special waterproof material for the bathroom is N times better than the mesh cloth. It's not that the mesh cloth is bad, it's that it's not used here. If your home is waterproofed, quickly ask the construction party to change.

  3. Anonymous users2024-01-21

    Personally, I think that the part of the yin and yang corner of the mesh cloth is actually and the use of mortar waterproofing agent is to make the yin and yang angle into an R shape is a reason, I personally recommend to do the waterproofing of the bathroom, directly with the mortar waterproofing agent than with other materials is more suitable, not only with the base surface pasted firmly, but also with high puncture strength, environmental protection and non-toxic waterproof can be the same life as the building, the construction is simple and cost-effective!

  4. Anonymous users2024-01-20

    The function of mesh cloth is to increase the tensile force and prevent cracking, but I have never seen such construction.

  5. Anonymous users2024-01-19

    It's not necessary, the effect of using it is no better than not using it.

    The mesh cloth is a glass fiber woven with medium or alkali-free glass fiber yarn and coated with alkali-resistant polymer emulsion. Mesh cloth series products: alkali-resistant GRC glass fiber mesh cloth, alkali-resistant wall special mesh and stone mesh cloth, marble back mesh cloth.

    The main uses are widely used in:

    1) Wall reinforcement materials (such as glass fiber wall mesh, GRC wall panel, EPS interior and exterior wall insulation board, gypsum board, etc.)

    2) Reinforced cement products (such as Roman columns, flues, etc.).

    3) Granite, mosaic mesh, marble back mesh.

    4) Waterproofing membrane cloth and asphalt roofing waterproofing.

    5) Skeleton materials for reinforced plastic and rubber products.

    6) Fireproof board.

    7) Grinding wheel base cloth.

    8) Geogrids for highway pavement.

    9) Calender tape for construction, etc.

  6. Anonymous users2024-01-18

    It's not necessary, the effect of using it is not better than using it.

Related questions
2 answers2024-05-02

In fact, it is very important to do waterproofing in the bathroom, if the wall of your shower is directly aimed at your bedroom or living room, then you must do waterproofing, at least to make it high, if it is only for the exterior wall, you can only do 30---50 cm high. Think about it, if you don't make the wall waterproof, the wall connected to your shower will definitely become moldy and even damp in the future. >>>More

6 answers2024-05-02

Waterproof coating is not suitable for wall waterproofing, because after the waterproof coating is done, it has to be made of a layer of concrete protective layer. The protective layer is thin and easy to crack and peel off. It is thick and takes up space, and it costs man-hours and hours. Use. >>>More

1 answers2024-05-02

To do bathroom waterproofing, you should first do wall waterproofing, and then do ground waterproofing, so as to prevent the ground waterproofing from being damaged when doing wall waterproofing again. >>>More

5 answers2024-05-02

It's best to do it all at once, and if you do it separately, you need to have enough overlapping layers.

8 answers2024-05-02

As we all know, there will be water in the bathroom every day, washing, bathing or something, there is a lot of water, the bathroom is often wet, waterproof must be done, the tile is waterproof, so you can paste it, if you don't stick it, it is easy to get damp and moldy, it looks very ugly, and you may not want to go into the bathroom to wash and go to the toilet, and it is easy to cause the wall skin to fall off, which is a very dangerous thing. >>>More