The toilet can t be saved, what s the problem with the water?

Pull the card position of the water scoop up and down with water to see the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, it means that the water scoop equipment is faulty. Remember to press the ladle down a little bit, not too high. If you don't know how to disassemble it, you can dry the water directly in the water tank and clean it with dish soap or laundry detergent.

If you can do this, you can continue to use it, and if it doesn't, you need to replace it with a new one.

What is the reason why the toilet tank can't hold water, and you must know the solution.

In life, we often have some small problems that need to be solved, especially the use of bathroom products in the bathroom.

In life, we often have some small problems that need to be solved, especially the use of bathroom products in the bathroom. For example, the toilet tank can't hold water, what is the reason? Let's take a look.

1. The reason why the toilet tank can't hold water.

There are generally two reasons why the toilet tank can't hold water, one is that the toilet itself has a problem. On the one hand, the parts in the toilet tank were damaged. So let's talk about these two reasons.

2. There are cracks in the inside of the toilet.

In such a situation, it seems that there is no problem with the toilet on the surface. However, in fact, the water is flowing all the time, which is why there are situations where the tank cannot hold water. You can check it out for yourself, and the specific method is as follows:

Turn off the inlet valve, then drain all the water in the toilet tank, and then pour colored ink into the tank with a little water and wait for half an hour. See if there is any place with color, if there is color, it is a case of cracking inside the toilet. In this case, the only way to do this is to replace the toilet.

3. The internal parts of the toilet tank are damaged.

If the toilet tank can't hold water, there is another possible reason, that is, the parts inside the toilet tank have been damaged, in this case, we have to disassemble the toilet tank, and then check what the parts are. If you don't see it, you can replace it, so the easiest thing to do is to replace it. But if there is no way to replace the parts inside the tank, then we have to replace a toilet tank.

In general, if the toilet tank does not hold water, either the tank is damaged or there is a crack inside the toilet.

1. The reason why the toilet tank can't hold water.

There are generally two reasons why the toilet tank can't hold water, one is that the toilet itself has a problem. On the one hand, the parts in the toilet tank were damaged. So let's talk about these two reasons.

2. There are cracks in the inside of the toilet.

In such a situation, it seems that there is no problem with the toilet on the surface. However, in fact, the water is flowing all the time, which is why there are situations where the tank cannot hold water. You can check it out for yourself, and the specific method is as follows:

Turn off the inlet valve, then drain all the water in the toilet tank, and then pour colored ink into the tank with a little water and wait for half an hour. See if there is any place with color, if there is color, it is a case of cracking inside the toilet. In this case, the only way to do this is to replace the toilet.

3. The internal parts of the toilet tank are damaged.

If the toilet tank can't hold water, there is another possible reason, that is, the parts inside the toilet tank have been damaged, in this case, we have to disassemble the toilet tank, and then check what the parts are. If you don't see it, you can replace it, so the easiest thing to do is to replace it. But if there is no way to replace the parts inside the tank, then we have to replace a toilet tank.

In general, if the toilet tank does not hold water, either the tank is damaged or there is a crack inside the toilet.

First, if it is leaking from the bottom of the toilet after flushing the toilet, and the water is not clear and has a peculiar smell, then it can be basically judged that the sealing ring on the drain pipe at the bottom of the toilet is not sealed, and the sealant on the edge of the toilet and the ground is not tightly sealed. This phenomenon mostly occurs shortly after the toilet is installed. Second, if it is found that there is water seepage from the surface of the toilet at any time, then it is suspected that there may be cracks in the toilet, and the inspection method is:

Turn off the inlet valve first, then drain the water in the toilet tank, and then add red ink or colored ink to the water remaining in the tank, stay for about 30 minutes, and observe whether there is colored ink in any place, if there is, you can conclude that there is a crack in the toilet, which cannot be repaired, even if it is repaired, it is also a problem toilet, and the only way is to replace it. Third, there is another situation that the toilet tank can not store water, which can occur in two situations, one is the problem of water parts, you can repair it, see if the leather cushion is loose, if there is no way, you can only change the water parts; Another situation may be that there is a crack in the inside of the toilet, and if the water is fine, it can be detected from the second method.

Break the ice cubes in the refrigerator and find a basin to put them.

2 5 about a kilogram of crushed ice is poured into the toilet.

3 5 Press the water supply button again, and any obstructed debris can be washed down without causing pollution.

4 5 Use toilet cleaner as a dredging agent: spray toilet cleaner (or 84 disinfectant) into the toilet bowl every once in a while, and close the toilet lid for a few hours.

5 5 Rinse with water to keep the toilet clean and smooth.

12 What should I do if the toilet tank can't hold water and the drain valve is broken? The master teaches you to fix it without spending a penny.