-
Anonymous users2024-01-23The main router (later called Route 1) is in the living room, normally connected to the network and settings, IP is set to turn on DHCP for automatic.
The secondary route (later called Route 2) in the bedroom, set the IP to, turn off the DHCP network cable connection: connect the LAN from Route 1 (4 identical, one of them) to the LAN of Route 2
In this way, the line connection is basically completed. The rest is.
The wireless name and password of both routers are set to the same. Can.
-
Anonymous users2024-01-22Do you need a WiFi signal for two bedrooms? Yes, you don't need to install a wired router in the two bedrooms, just replace the router in the living room with a wireless router with better quality and signal, such as a router with one or two hundred or two or three hundred. If the router can be placed in the middle of the whole house, try to place it in the middle of the whole house to get better wireless coverage.
1. Reset the settings of the wireless router first.
2. Set the debugging computer to automatically obtain the IP address. >>>More
How good it is to buy a wireless directly, and it is more convenient to have a direct bridge.
What is the brand of your router?
A: Yes.
Connect your computer directly with your second router first, enter with the IP address behind the router, there is an account password behind it, if you don't know, you can reset the router, change your router IP to the last digit of the first router after entering the router should be 1), the previous xxx is the same as the setting of your first router, turn off the DHCP in this router, and then connect a network cable from the LAN port of the first router to the LAN port of the second router. >>>More
In fact, it's very simple, first connect the wireless router with a network cable, set up the wireless router, and then replace the wired router! (Wired and wireless can be used, wired for desktops, wireless for laptops and mobile phones). Steps: >>>More