What should I do if my newly bought furniture has caused secondary pollution due to the use of photo

It is worth noting that it may be that the film-forming of the photocatalyst is destroyed by not paying attention to it or the illumination is insufficient, which will cause the photocatalyst to fail to work. Therefore, it is not recommended to use this method, and the following methods hope to help you.

1. Photocatalyst and photophyll spraying. The latter is a pure plant extract, which can be decomposed without light, and is safe and harmless. The sprayed molecules can penetrate deep into the interior of the furniture panel to decompose formaldehyde.

2. Plant selection aloe vera, spider plant, tiger tail orchid, one-leaf orchid, and monstera are natural aldehyde plants, which can also help decorate the house and relax the mood.

3. Aldehydes can be dissolved in water, so you can put salt water or vinegar water in the place where you don't get in the way of your feet at home to absorb part of the formaldehyde. A variety of greenery helps to absorb and purify the air.

Summary. I hope I can help you, I guess I used a fake photocatalyst. The decomposition efficiency of photocatalyst is related to ultraviolet (light), and under the condition of sufficient ultraviolet rays, it can effectively remove pollutants in the air, but it is separated from light and has little effect.

Even though the photocatalyst has been used for many years, the decomposition efficiency of pollutants under low-light conditions is still unsatisfactory. If the indoor pollution is low, you can breed more plants indoors, I hope you can be satisfied with the thumbs up, I wish you a happy life

What should I do if my newly bought furniture has caused secondary pollution due to the use of photocatalysts?

I hope I can help you, I guess I used a fake photocatalyst. The decomposition efficiency of photocatalyst is related to ultraviolet rays (light), and under the condition of having enough ultraviolet rays, it can effectively remove pollutants in the air, but it is detached from light, and the effect is minimal. Even though the photocatalyst has been used for many years, the decomposition efficiency of pollutants under low-light conditions is still unsatisfactory.

If the indoor is low pollution, you can breed more plants indoors, I hope you can be satisfied, give a thumbs up, I wish you a happy life

As a result, my hands and feet were numb, I coughed, I couldn't breathe, and my nose couldn't breathe.

How to clear that.

It's sprayed everywhere in the house.

1. If the return is that the middle-aged and elderly patients have numbness in the hands and feet, dyspnea, it is necessary to ask whether there is diabetes, chronic renal insufficiency, or whether there is any water and electrolyte disorder caused by drug poisoning, and metabolic alkalosis, which will cause numbness in the hands and feet, and difficulty breathing. Clause.

2. If it is caused by the emotional agitation of young women, it is necessary to consider that the patient has the onset of hysteria, which causes numbness in the hands and feet and difficulty breathing, so the patient's symptoms will be alleviated after the treatment of diazepam should be given at this time.

I want to clear this agent may be a peptide dioxide, is there any good way?

I hope it can help you, the only way to remove the dioxide type peptide is to use concentrated sulfuric acid to make it a rental model titanium sulfate, and then wash it away. It seems that it is possible to use about 20% hydrochloric acid under heating conditions, I hope you can be satisfied and give a thumbs up, I wish you a happy life, and is it useful to use 95% alcohol.

It is estimated that a fake photocatalyst was used. The decomposition efficiency of photocatalyst is related to ultraviolet (light), and under the condition of sufficient ultraviolet rays, it can effectively remove pollutants in the air, but it is separated from light and has little effect. Even though the photocatalyst has been used for many years, the decomposition efficiency of pollutants under low-light conditions is still unsatisfactory.

The domestic market is currently flooded with all kinds of photocatalyst brands invented in Japan and originated from Japan. Not to mention whether the domestic hot-selling photocatalyst is really from Japan. A little understanding of the Japanese market can be known that photocatalyst technology is mostly used in the field of exterior wall cleaning and anti-fouling in Japan, and is not used in indoor aldehyde benzene removal, etc., the main reason is that the indoor light is insufficient, which is not enough to achieve a qualified decomposition effect.

Therefore, it is still necessary to choose truly scientific and effective formaldehyde removal products to eradicate the threat of formaldehyde to health.

You look at what the construction unit uses to give you construction, Now there are many fake photocatalysts on the market that are used to remove formaldehyde extrusion, which is harmful to the human body, and the Milky Way photocatalyst contract is invalid in addition to formaldehyde 3 times compensation, you can go to their website to see.

Since the use of photocatalysts has caused secondary pollution, it is recommended to find an authoritative testing agency to test and confirm, and confirm that the secondary pollution caused is established, and you can find the construction party to claim compensation.

Real photocatalysts do not cause pollution. Photocatalyst is a general term for photosemiconductor materials with photocatalytic function represented by nano-scale titanium dioxide, which is coated on the surface of the substrate and produces a strong catalytic degradation function under the action of ultraviolet light: it can effectively degrade toxic and harmful gases in the air; It can effectively kill a variety of bacteria, and can decompose and harmless the toxins released by bacteria or fungi; At the same time, it also has the functions of deodorization, anti-fouling, and air purification.

It must have been a counterfeit product. Photocatalysts are tasteless!

A truly high-quality photocatalyst can continuously control air pollution and remove harmful substances for a long time. As long as the photocatalyst coating is not detached, it can continue to react effectively and improve indoor air.

Because photocatalysts can remove the smell of smoke, introduce a simple and effective way to test whether the photocatalyst you make is really high-quality. Smoke or perfume spraying test (smoking indoors) in a car or room that has been constructed by photocatalysts, and under the action of sunlight (natural light or fluorescent lights), the smell of smoke will disappear automatically after 1 2 hours.

Before making a photocatalyst, ask them if they can get rid of the smell of smoke after the photocatalyst is done. No, it's generally fake or inferior.

In addition, high-quality photocatalysts can act on any substrate, using apatite encapsulation technology (breaking through the bottleneck of titanium dioxide application technology) to isolate organic substrates, which will not corrode other materials and will not be corroded by other materials. Counterfeit and shoddy products will corrode leather sofas, etc.

Don't understand what you mean? As long as it is a high-quality photocatalyst, it does not contain adhesives and does not have any peculiar smell, how can it taste weird? After processing the photocatalyst, ventilate the front and back for a week, open all the wardrobe drawers, it is best to add a purple lamp indoors, so that the effect will be very good, unless you buy a fake and shoddy photocatalyst There are several ways to identify photocatalysts, go to my space to see, if you feel really worried about photocatalysts, it is recommended that you ventilate and buy coconut shell carbon to deal with it It is to put more in the polluted places of the furniture Very effective and miraculous, you can try I hope what I said will help you.

The catalyst is an item that disappears after being illuminated, so why is it still painted?

Big brother, you've been deceived.

Please look to the relevant department for another look.

If you're a friend of Shenzhen, I have a solution.

I have a friend who is really doing eco-friendly work for a large decoration company.