-
Anonymous users2024-01-23Prepare the materials. 1.Neutral weather-resistant adhesive (with glue gun is the best).
2.Utility knife.
3.Brushes. Steps: Use a knife to cut off the original cracked glue along the window frame, brush the dust and debris between the frame and the wall with a brush, ensure that it is dry and clean, and cut the glue nozzle into an oblique mouth with a diameter of 30°.
Start gluing, the bevel surface of the glue gun nozzle and the frame and the wall are squeezed horizontally and vertically, if you have no experience, there is no requirement for aesthetic problems, the key is waterproof, after the glue, bring disposable plastic gloves, and wipe it with your fingers along the glue, in order to let the glue with more into the gap.
Don't use cement, it will crack in the sun after repairing, even if it does not crack, the cement gray wall itself will absorb water without exterior wall paint.
-
Anonymous users2024-01-22It is not recommended to use foam filler for wall joints, this glue just allows you to see the joints and can't block the rainwater, you go to the building materials market to buy it.
Silicone structural adhesives.
Hit the seam between the window and the wall [outdoor should also be glued], [it's really strange, why don't you sit in the foam board in your window, it's not safe] must be cleaned before gluing, and then paste the tiles after it is completely solidified, and the tiles on the foam board are easy to fall off.
Remember, if you don't understand, continue to send pictures and ask.
-
Anonymous users2024-01-21It is not recommended to use the foam filling agent for the wall joints, this kind of du glue just makes you unable to see the seams, can not block the rain, dao you go to the building materials market to buy the silicone knot internal structure glue capacity on the seam between the window and the wall [outdoor should also be glued], [really strange, why don't you sit in the foam board in your window, this is not safe] must be cleaned before gluing, and then paste the tiles after it is completely solidified, and the tiles on the foam board are easy to fall off.
Remember to adopt it.,If you don't understand, continue to send pictures to ask.。
-
Anonymous users2024-01-20It can be filled with commercially available foam filler for wall joints, and then applied to wall tiles.
After the installation of the balcony plastic steel window, there is water seepage with the gap between the wall and the wall, if it is generated by the plastic steel window, the plastic steel window can be installed with adhesive strips to overcome. >>>More
There are generally two ways to deal with this situation, the first is to fill the void at the bottom with cement or styrofoam. The second method is to add fixing bolts to the sides to prevent further sinking.
Plastic steel profile refers to the PVC profile used for making doors and windows, which has appeared in Germany as early as the end of the fifties of the 20th century, and China began to introduce it in 1983 and began to be widely used at the end of the 90s of the 20th century. Because the strength of the doors and windows processed by PVC profiles is not enough, steel is usually added to the cavity to enhance the firmness of the doors and windows, so the plastic doors and windows made of steel inside the profile are usually called plastic steel doors and windows. With the widespread use of plastic steel doors and windows, the PVC profiles used to make plastic steel doors and windows are commonly called plastic steel profiles.
The good ones should be about 4-50,000, the general ones should be about 2-30,000, and the bad ones should not be changed.
See if the pulley under the window is broken and stuck in the middle and can't move, if so, use a wooden block to cushion it while holding a hammer to hammer in the opposite direction with skillful force, and the plastic steel window can be lifted up and down as long as it can be moved.