-
Anonymous users2024-01-23Remove the heating bulb first, and then remove the panel, note that the panel is soft, it is two long sides stuck in the ceiling keel. Reach into the hole of the bulb and slowly pull it out. It can be seen that the light is stuck on the panel, wired to the electronic ballast.
-
Anonymous users2024-01-22Use a knife to insert it into the seam of the edge of the panel and pry it a little. Or cut the adjacent ceiling and reach in to push the bomb panel out.
-
Anonymous users2024-01-21Screw bulb, just unscrew it off.
Unscrew the 4 bulbs, you can see the hook inside, remove the panel, and it's good to change.
-
Anonymous users2024-01-20Just unscrew it like a regular rib light bulb.
First, take off the bath bomb lamp;
Second, use a knife to warp an integrated plate down at the gap of the integrated plate, and you can take an extra piece. >>>More
Open the main switch, then uninstall the switch of the bath bomb, unscrew the various wires, wrap it, and then turn on the main power supply.
Open the cover, there should be circlip fixed around it, use a tool to pry down on both sides and there should be a gap, stretch it down and try it.
How to replace a bath bomb bulb after it is broken.
1. First of all, cut off the power supply first. >>>More
The bath bomb can be replaced separately and will not affect the ceiling, but it is dangerous to disassemble the bath bomb and requires professional operation. >>>More