What should I do if the bathroom bomb switch is broken?

Check first to see if it's caused by a power supply or wiring problem.

If not, then the bath bomb switch is broken, friends can buy a new bath bomb switch panel first, and then repair it.

When repairing, you must remember to close the electric switch in the home first, and then the first step is to remove the waterproof cover outside the switch, generally there is a small gap on the side of the waterproof cover, friends only need to use a smaller flat screwdriver to insert it, and then knock hard, the waterproof cover can be removed.

After removing it, friends will see that there are two screws on the left and right sides of it, as long as the screws are loosened, the switch can be removed.

Next, the wires on the old switch panel are removed and fixed to the corresponding button of the new switch panel.

Generally, there are at least five wires on the bath bomb switch, which are two for heating, one for ventilation, one for lighting and one for live wire, friends in the process of removing the wire, remember not to install all the wires after dismantling, otherwise it is easy to get it unclear, so it will be very troublesome, be sure to remove a wire, install a wire, so that it is not easy to make mistakes.

Finally, after all the switch panels are replaced, it is installed according to the original steps, and then the electric switch is opened to test it.

The bathroom bath bomb switch is broken, will not be repaired? Just keep this one in mind and it's easy to repair and replace.

The bath bomb switch is broken, if you have a strong hands-on ability, it is recommended that you buy the same one and replace it yourself.

It's as simple as five wires, one live wire, and four control wires.