As soon as I turned on the light in the living room upstairs, it smelled of mush, like the smell of

Updated on Living room 2024-04-17
4 answers
  1. Anonymous users2024-01-23

    There should be a short circuit in it or the interface is not connected, and the problem is not big. It is recommended to find an electrician to fix it.

  2. Anonymous users2024-01-22

    The leakage protector is faulty and replaced.

  3. Anonymous users2024-01-21

    The screws are not tightened, resulting in poor contact.

  4. Anonymous users2024-01-20

    There may be a wire that is missing, just ask an electrician to check it.

Related questions
As soon as the range hood in my house is turned on, why does the bathroom smell bad
3 answers2024-04-17

Regarding the smell in the bathroom when the range hood is turned on, he is because when the range hood is turned on, the indoor air is discharged to the outside, and the indoor air pressure will be lower than the pressure of the surrounding environment of the outdoor house, and the outdoor air will enter the room through various ways, so that the indoor and outdoor pressure can be balanced. So there is still some peculiar smell in the air.

As soon as the living room light was turned on, the whole floor tripped, and there was no problem be
2 answers2024-04-17

As soon as the living room light was turned on, the whole floor tripped, indicating that the switch had tripped. >>>More

As long as the fluorescent light in the living room is turned on or off, the computer will crash, an
13 answers2024-04-17

There are 2 possibilities.

1. The power supply capacity is too weak, that is, the power supply of your house is too small, resulting in a little load voltage dropping, and an inductive back electromotive force directly pushes up the voltage when the fluorescent lamp is turned on, resulting in instability. >>>More

As soon as the living room light was turned on, a small fire splashed out, followed by the lights of
7 answers2024-04-17

There is a short circuit in the circuit between the switch that controls the light and this light. It is recommended to remove the lamp, remove the switch, protect it with insulating glue, and then close the main switch. If it does not trip again, it means that the judgment is correct, and then check whether it is a short circuit between the lamp, switch, or the wire, replace it, and connect it back to the circuit, and it is OK.

The light of the integrated ceiling in the bathroom is broken, but what happens when the switch is t
3 answers2024-04-17

That's a few LED lamp beads burned out, and there are two reasons: >>>More