-
Anonymous users2024-01-23One. If the float of the pontoon cargo float of the inlet valve is stuck, you can pull the float up and down with your hand, and it can move up and down smoothly under normal circumstances.
Two. There may be foreign matter inside the inlet valve, resulting in the needle valve pressure chamber at the top of the inlet valve can not be formed and can not stop the water, in such a situation, for the general user, there is a great difficulty in repairing alone, it is best to ask a professional to repair or buy a replacement.
When purchasing the water inlet valve, be sure to measure the height of the water tank in advance, so as not to cause the water inlet valve to be installed due to the fact that the water tank is too low, generally speaking, the adaptability of the domestic split (water tank and toilet bowl separated) toilet is better, and most of the water inlet valves can be used, and the conjoined (water tank and toilet bowl are integrally formed) may have a water tank too low due to process reasons, please be careful. For areas with poor water quality, when buying an inlet valve, especially the more common needle valve, it is best to equip it with a filter to filter impurities, or use an old-fashioned simple inlet valve (the one with a large float) Regular cleaning of the inlet valve can also reduce the occurrence of more than water: 1 Remove the inlet pipe of the water tank from the left side of the bottom of the toilet, and then remove the plastic nut at the bottom of the inlet valve.
Then you can take the inlet valve out of the tank. 2. Remove the water supply pipe of the water inlet valve (generally at the top, a plastic hose, the overflow pipe connected to the drainage valve), pick up the plastic cover, loosen the water drifting connecting rod, and then take it up and down and twist it in the opposite direction.
-
Anonymous users2024-01-22Do you see that ball, there's a switch under the other end of the bar, maybe it's broken, try something more, if it doesn't work, turn off the water valve, or change it.
What kind of water do you make? If it's tap water, shouldn't there be such a thing?
Siphon type generally to use the water flowing out of the water tank, as long as the drainage pipe is not blocked, the toilet is no problem should be due to the small water storage, the water can be adjusted to the water valve, try to get a higher water level, not more than the overflow can be, try it.
1. If the strength of the float is not enough, open the water tank, bend the metal rod on the float, or adjust the distance between the float and the rope between the plug. >>>More
The top is to fill the basin with water, and if you can't adjust it, it's dead, and the bottom is to fill the water tank, which can be adjusted, and its level directly affects the amount of the water tank.
1. Flush switch problem.
You can check whether the flush switch is restored to its original state, because the flush switch in some toilets is easy to wear out after being used for a long time, or it is stuck, so it cannot be restored. Typically, the switch can be reset by repeating it a few times. >>>More