How can you make the water on the flush toilet not so full

If the toilet is not watered, it means that there is a problem with your water supply, first of all, to see if the water is stopped, to see if the water valve is open, to see if the water stop valve in the toilet is easy to use, and the toilet is generally not watered on these three problems.

The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More

The towel was tightly wrapped around the stick, tucked into the toilet drain, pulled out violently, and repeated several times. If it really doesn't work, then go find someone who specializes in dredging!

1.The side handle chain of the side press and side wrench toilet is long, so that the water stop pad stops the water very quickly, although it moves. >>>More