-
1. Before installation, check whether there is any blockage such as mud and sundries in the sewage pipeline, and whether the installation ground is level.
2. Determine the center of the sewage pipe and the center of the toilet outlet, and adjust the wall within the error range.
3. Determine the installation position at the bottom of the toilet. Dry installation: Use an electric drill to drill the installation holes and embed the expansion screws. Wet and dry installation: Use an electric drill to drill the installation holes and embed the expansion screws.
4. Install a sealing ring on the sewage outlet of the toilet, or put a circle of glass glue around the sewage pipe, put the toilet according to the position of the line, and adjust the level.
5. Dry installation: screw on the screws and seal a circle of white cement around it. Wet installation: Adjust the landscaping sealing surface.
6. Install and debug the water tank accessories. Depending on the situation, some need to do this first. In addition, some toilets are difficult to debug if they are found to be abnormal after installation due to their emphasis on aesthetics (although this situation is not much, but it has also been encountered), it is recommended to test the water before installation.
7. Install the toilet cover. Depending on the situation, some need to be done first.
8. After installation, it should wait for the white cement or glass glue to solidify before use, generally 24h.
How do I unclog a toilet quickly? How to install a toiletToilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More
1. Before installation, check whether there is any blockage such as mud and sundries in the sewage pipeline, and whether the installation ground is level. >>>More
Before installing the toilet, the sewage pipeline should be comprehensively inspected to see if there is mud, sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation position is horizontal. Determine the center of the sewage pipe and draw a cross centerline. Flip the toilet, center it on the toilet drain, and draw a cross center line, which should extend to the bottom of the toilet around the feet. >>>More
1. Folding clothes pole purchase skills.
1.Category. (1) There are three categories of balcony drying rods: fixed, lifting and telescoping, among which the lifting balcony drying rack and telescopic balcony drying rack are divided into manual and electric. >>>More
In fact, the toilet pit does not need to be installed by professionals, and you can install it yourself, if you want to know how to install it, look at the following procedures, and the smell of the toilet will be gone. >>>More