-
Anonymous users2024-01-23The method of fixing the gypsum board and the light copy steel keel adopts the self-tapping screw fixing method, and the paper gypsum board is installed under the light steel skeleton that has been installed and experienced (that is, to do the concealed acceptance work). Install self-tapping screws for gypsum board (specification 25 * fixed, self-tapping screws should be 150 170mm away from the edge of the board, and the screws should be perpendicular to the board surface and evenly arranged, and the screws that have been bent and deformed should be removed, and the screws should be installed at 50mm away from the original nail position. The self-tapping screws should be 10-15mm away from the edge of the board (the gypsum board is the edge of the paper), and the cutting edge of the board is 15-20mm.
The nail head should be embedded in the gypsum board at a depth that is appropriate, and the nail cap should be brushed with anti-rust paint and smoothed with gypsum putty.
Drill holes in the glass and fix them to the wooden keel inside the plasterboard with lens nails! The premise is that the keel is reserved in the early stage of carpentry! Otherwise, the screws of the mirror nails are not fixed on the keel, and the glass will fall off after a long time! >>>More
Elastic line, nail wood square, more than ten meters of ceiling to play expansion screws, with spring rain nails to fix the gypsum board, first the façade and then the plane cover.
1. PVC ceilingPVC ceiling is made of polyvinyl chloride as raw material, extruded and assembled into a frame and then made of glass. It has the characteristics of light, wear-resistant, age-resistant, good heat and sound insulation, heat and moisture-proof, insect-proof and fireproof. It is mainly suitable for kitchens and bathrooms. >>>More
"The inside side is against the wall"? It won't be, right? Otherwise, there is no connection between the top and bottom of the ceiling, why doesn't it fall down? >>>More
It can be constructed, no problem, this process has been there many years ago, but it has not been promoted because of the relatively high cost. >>>More