How to deal with the base layer of wood board interface for painted furniture?

Updated on furniture 2024-04-27
2 answers
  1. Anonymous users2024-01-23

    The putty should be scraped at the interface first, and then the paint can be applied after polishing and drying.

  2. Anonymous users2024-01-22

    It is advisable to find a professional painter, then the effect will be very good. Because if you DIY yourself, you will definitely not be able to do a good job, and the specific construction process is as follows:

    1. The base layer is coarsely ground and smooth without burrs<180 sandpaper".

    2. Use PE to fill the soil "unsaturated resin production" to scrape the base and interface flattened.

    3. After it is completely dry, polish the surface to be smooth and smooth.

    4. Spray the primer of "Brush Painting".

    5. Polishing <320 sandpaper" sand to be smooth and smooth, pay attention not to sand through.

    6. Spray the primer of "Brush Painting".

    7. Sanding <400 sandpaper" light sand.

    8. Spray the topcoat.

    Depending on the demand for the surface finish of the furniture, it can be adjusted appropriately.

Related questions
How to deal with the base layer of aluminum-plastic panel ceiling
2 answers2024-04-27

It can be installed by dry hanging process by boom and light steel keel. >>>More

What to do if there are moths in the wooden boards of furniture
5 answers2024-04-27

In particular, solid wood furniture and bamboo furniture have become a "happy land" for moths. This is because bamboo and wood are rich in cellulose, hemicellulose, sugar, fat, protein, etc., which are nutrients for insects such as borers and termites. >>>More

How to deal with scratches on painted furniture
5 answers2024-04-27

If it doesn't fall off a lot and the scratches are not very deep, you can use the corresponding color to smear it, or use the natural color of shoe polish to smear it, and use the corresponding color of the pen to supplement the color, and a large area can be mixed with sawdust and glue (502 old can be) to fill it Scrape flat with a knife, repeat the above steps, try it But it is recommended that it is best to find a professional, or a place where you buy furniture, which is generally free to repair.

How to choose furniture paint
1 answers2024-04-27

High-end furniture is commonly used for unsaturated polyester paint, which is commonly known"Piano lacquer"The characteristics of unsaturated polyester paint are: >>>More

The paint of the solid wood floor has faded, what to do
2 answers2024-04-27

1.The large-scale flooring innovative machinery is used to polish and remove the paint layer, surface layer and wood layer for about millimeters, and then carefully sanded to make the floor delicate and lubricated to a new condition. The corners of the floor are polished with a small angle grinder to achieve the overall smoothing effect. >>>More