-
Anonymous users2024-01-23Spherical door locks: The inner and outer handles (lock handles) are spherical, which are used for door locks installed on wooden doors, steel doors, aluminum alloy doors and plastic doors. Spherical locks are divided into the following according to the lock body structure
Cylindrical ball locks, three-bar ball locks, fixed locks, pull glove locks; The locking device is divided into a button, a knob and a press knob. Ball locks are divided into marble ball locks and blade ball locks according to the lock structure. Ball locks are divided into Class A (safety type) and Class B (ordinary type) according to their different use requirements, such as performance, safety, practicability and end-use effect.
Installation tool preparation.
The spherical door lock installation tools include a cross up, a slotted one, a 3-meter tape measure, a pencil, a pistol station with a hole opener, and a chisel.
Installation Steps. According to the spherical door lock installation size diagram, drill and chisel the lock body installation hole, install the spherical lock body into the hole position in turn, straighten the rear fixing screw, install the screw rod and the connecting screw rod on the outer panel part, insert the linkage square rod into the square rod hole of the lock body, align the square hole of the handle handle of the outer panel part with the linkage square rod hole, install the outer panel part, install the inner panel part, and fasten the screw after centering; Insert the lock body into the lock hole of the lock body from the inside out; Insert the screws from the hole of the lock body panel and tighten them after threading the mounting hole of the lock body. Then install the lock box or lock plate on the door frame;
After the initial installation, rotate the outer handle and the inner handle to observe whether the oblique tongue can be smoothly retracted and extended; Turn the knob on the rear panel to feel whether the square tongue is smoothly retracted; Insert the key and rotate back and forth to feel whether the square tongue is smoothly stretched out and retracted, after tightening the assembly screws, repeat the above action, test several times, if the action is not smooth, loosen the screws, adjust the position and try again until it is suitable.
Spherical door lock opening must be strict opening diagram identification of the installation size of the opening, opening size and positioning must be according to the opening drawing standard, if the opening is too small is easy to cause the door lock circuit board extrusion deformation, resulting in the installation is completed, the door lock can not work normally, resulting in a variety of phenomena that should not occur, should be careful when opening the hole, can not open the hole or crack the door, if the hole is too large, it will cause the lock body to be unable to cover the hole, seriously affecting the overall appearance.
Some installation methods of spherical door locks are introduced here, have you learned how to install spherical door locks after reading them? For spherical door lock installation, it can be summarized into two points. The first thing is to have all the tools you need, so you don't have to look for them here and there during the job.
The second is to drill accurately, if the hole is wrong, it is difficult to remedy.
This is a waterproof box, there is no screw connection between the waterproof box and the socket, directly use an electric pen to pry, when prying, from the bottom or the left and right sides, find holes or lines, there is a different place, you can save some effort. Pry open the panel after prying open the waterproof case. Only then can you see the two M4 screws on the left and right inside, use a Phillips screwdriver. >>>More
Mainly look at the model of the toilet to develop the installation of the toilet procedures, it is easy to say that it is complicated, and it is not difficult to do more, the current installation of the toilet is very simple, take the pure conjoined toilet as an example: first of all, the water parts in the water storage tank, the drainage center pipe is good, debug the flexible activities of each component, in place, there is no mechanical jamming, (the complete set of water supply and drainage parts have installation drawings assembled in accordance with the drawings of the components) will purchase the sealing flange on the drain port of the toilet, and play a circle of sealant on the ground at the position of the toilet, Look at the drain outlet and align the sealing flange of the toilet drain with the drain and put it well, find the correct position, find the level, fix it, and then play a circle of sealant around the toilet bowl, and connect the connecting hose of the water valve, and you can do it
I just passed by you the other day. It was also locked, I directly got a screwdriver, and the star's keyhole was stuffed in, and it was violent! Call a lock industry to 50-100,. Solve it yourself, and you won't lock it in the future.
The first step is to install the cabinet. We can first put the wooden board on the left side of the cabinet on the ground, put a screw on the glued hole, and then fix the back pull bar and the screw together, and lock the lock handle. Then we need to install the top plate on it, so that we can see if the wardrobe has a simple appearance. >>>More
Reason why the spherical door lock is stuck:
1.The key lock is not opened in place, turn the key clockwise to the end. >>>More