How to deal with wrapping the hanging air conditioner when making a suspended ceiling

I can't handle it. Stove balance dismantling.

Household split wall-mounted air conditioners are originally designed according to surface-mounted products, and they need to be ventilated from below and returned from above and front during their work. If the entire wall-mounted indoor unit is wrapped with a suspended ceiling, it will inevitably lead to a smaller circulating air volume of the indoor unit, which will affect the effect of air conditioning, and in serious cases, it will lead to frequent protective shutdown of the air conditioner and cannot be used normally.

In addition, the ceiling wraps the wall-mounted air conditioner indoor unit, and once the failure needs to be repaired during use, the ceiling will be destroyed, which is very troublesome.

It is recommended to change the hanging position of the indoor unit more hidden, or vacate the position of the hanging indoor unit without hanging the ceiling.

Air conditioners cannot be installed upside down on the ceiling, and are generally installed on the wall.

The specific sequence of installing a hanging air conditioner:

1. Select the appropriate position to punch the hole.

2. Set the wall board (it is best to find a level, and the drainage end is slightly lower by about half a centimeter) 3. Blindly connect the power cord of the indoor unit and the copper pipe to grind and close.

4. Install the outdoor unit (pay attention to safety).

5. Connect the copper pipe and wire of the outdoor unit.

6. Emptying (first tighten the copper cap of the thin tube with a wrench, open the valve core of the thin tube with an Allen wrench, and wait for the air to be discharged in the thick pipe and tighten the copper cap of the thick tube, and the time is controlled in six or seven seconds.) Finally, open all the spools. ）

Under normal circumstances, businesses that sell air conditioners provide door-to-door installation services, and only by installing air conditioners by professional personnel can they be assured of use.

I can't handle it.

Household split wall-mounted air conditioners are originally designed according to surface-mounted products, and they need to be ventilated from below and returned from above and front during their work. If the entire wall-mounted indoor unit is wrapped with a suspended ceiling, it will inevitably lead to a smaller circulating air volume of the indoor unit, which will affect the effect of air conditioning, and in serious cases, it will lead to frequent protective shutdown of the air conditioner and cannot be used normally.

In addition, the ceiling wraps the wall-mounted air conditioner indoor unit, and once there is a failure and needs to be repaired during use, the ceiling will be destroyed, which is very troublesome.

It is recommended to change the mounting position of the indoor unit, or vacate the hanging position of the indoor unit without hanging the ceiling.

In fact, this is very bad, and it is not conducive to the heat exchange of the air conditioner. Therefore, the effectiveness of the air conditioner will also be greatly reduced.

If you really want to install it like this, you can only follow the practice of the duct machine. Make a louver of the corresponding size according to the size of the indoor unit in front of the position of the air conditioner. And the spacing between the louvers must be large.

As much as possible, the need to ensure heat transfer conditions. Frankly, this is very bad for the aesthetics of smallpox. But it's also a helpless solution.