-
Anonymous users2024-01-23First of all, check if the plug attached to the chain in the first picture is leaking, and if it is okay, see if there is still a sound of water entering the blue float. If it doesn't mean that everything is normal, the thin white plastic pipe on the top is used to fill the height of the water in the toilet after flushing the toilet, which plays the role of a water seal and prevents the odor from overflowing.
Under normal circumstances, after flushing the toilet, the plug will fall and stop the water from coming out; The toilet tank is filled with water, and the white thin plastic pipe continues to fill the water seal; When the water tank is full, the blue float is in place, the water tank stops entering the water, and the white thin plastic pipe stops coming out of the water.
-
Anonymous users2024-01-22It's the blue one with a broken water inlet valve, go to Taobao to buy one and replace it, you don't need to buy the original one. The screws are under the tank.
If you can flush it with a basin, it proves that the water should be fine. >>>More
It's the toilet that is broken, usually the self-closing device is not reset. Please press the flush button a few more times to give it a try, and it may be restored. If it cannot be restored, the toilet angle valve can be closed before it is repaired to prevent wasting water.
With a leather puff. Put more water in the toilet, and the leather kick should completely buckle the drain of the toilet, and then pump it vigorously for about 10 times, then pull it up to see if the water has gone down, and then repeat, so that 5-10 times or so, the slight blockage will be relieved.
First of all, you have to be aware of the different flushing methods. >>>More
There are many situations in which TOTO toilet flushing is weak, and the solutions to each situation are as follows >>>More