-
There are many situations in which TOTO toilet flushing is weak, and the solutions to each situation are as follows
1. Possible cause: blockage of sewage pipe.
Solution: Remove the debris in the sewage pipe.
2. Possible cause: Incorrect installation of water supply pipe.
Solution: Install the water supply pipe as shown in the figure below.
3. Possible cause: Blockage of the water pipeline.
Solution: Remove debris from the water pipes.
4. Possible reason: The water level in the water tank is less than the standard water level.
Solution: Adjust the inlet water to the standard water line.
-
Adjusting the water level of the storage tank can be solved, and the water level can be adjusted higher.
Toilet flushing slowly, powerless, no whirlpool? Move this small mechanism in the water tank, easy to solve, practical.
Causes and solutions for toilet flushing weakness: blockage, water level of the inlet valve is too low, >>>More
When the toilet flushes, the water is very weak and slow, what should I do? >>>More
First of all, you have to be aware of the different flushing methods. >>>More
PChouse Comments: After the experience of the appearance, material, functional design and actual effect of TOTO's toilet and Washlet, we found that TOTO's toilet seems to be suspected of being overly beautified. The appearance of the toilet is ordinary, the flushing effect is not good, the washlet material is not durable, the functional design is flawed, and the overall experience is not good. >>>More