-
Anonymous users2024-01-23If the beam is in the center of the living room, it will not only make people feel oppressed, but its position is just around the important space, so there is a beam ceiling in the middle of the living room, how to decorate it?
First, the shape of the early celery partition space.
In the living room, the beam across the living room, generally at the junction of the living room and the dining room, this kind of beam is easier to handle, the living room and the dining room are separated from the ceiling modeling, the beam can be used to do the division, one side is at the same height with the beam, and the other side is more than 10 centimeters lower than the beam surface, and the stepped partition space is made; If the beam is on the edge, it can be made into a hollow shape, leaving the light groove and installing a light tape to cover it to hide or divert attention.
Of course, there are self-built houses, and the beam with a large span will definitely be in the middle of the living room, in this case, you can do the ceiling parallel to the beam, so that you can't see where the beam is without looking carefully, and you can also use this beam to divide the living room into two halls, one for the living room, one for the dining room, or a leisure world.
Second, false beam modeling.
The false beam shape is more suitable for the situation that the beam is in the middle of the space, and the beam height of this type of house can be used to hang the ceiling if the floor height is sufficient, but usually the floor height of the house type is not so high, so it is necessary to find a way to deal with the beautification of the beam, and in terms of beautifying the beam, the false beam shape is usually very good.
3. Be bold and "leave blank".
The so-called bold blank space is not to do special treatment of the beam, such a bold treatment, requires a very careful design. If the beam is at the boundary of the space, the top beam and the wall below are painted with latex paint of different colors to make the space appear more layered. For the space with a large floor height, the beam that is not directly treated is actually quite generous.
-
Anonymous users2024-01-22If the height of the floor allows, cover it directly; If the height of the floor does not allow it, it should be taken into account in the overall layout. You can upload a sketch of the plan and the corresponding instructions below to help you take a look.
I am a designer of Jinan decoration, and if you don't understand it in the future, you can ask me. Are you a community in Jinan, if so, you come to our company and we will talk about it.
In fact, for how to decorate the design of the ceiling board with beams, the most important point is to be based on the horizontal.
How to decorate the living room with beams 1, some families with beams in the living room must adopt different decoration methods, otherwise they will not be able to achieve the relevant decoration effect, and the whole decoration can not be carried out smoothly. This is the situation that makes a lot of families hope to help some design improvements, and make full use of the actual conditions in the specific decoration, and carry out a variety of the most suitable and best decoration process. >>>More
Explain the specific location of the body: what space corresponds to below, the height of the body, etc. See if they are covered by a small area of suspended ceilings.
Huaguan decoration thinks that you can do a modeling, the living room and the dining room are unified with the ceiling and then do the modeling, you don't do the ceiling, the top of the dining room with flowers to make a simple thin shape, and then the beam and the top of the dining room on the same color, so that there is a sense of unity, you can connect the beam and the dining room to make an arc, do not take up space, and have a sense of wholeness! Hope it helps.