-
Anonymous users2024-01-23To install a toilet, it is generally necessary to connect the water, place the toilet, and close the perimeter with glue. So, all you need to do is make a circle of contact between the toilet and the floor, use a wallpaper knife to cut it, remove the hose that supplies the water supply, and move it away from the toilet!
-
Anonymous users2024-01-22This has to be done by a professional, and when you install it, you will definitely be able to remove the old toilet, and you may be charged a little demolition fee, which you can ask the store before you buy it.
-
Anonymous users2024-01-21Insert the slotted screwdriver into the bottom and hit the screwdriver with a hammer to disassemble it.
The flush toilet is not equipped with a check valve even if it is on or off the water, and the water inlet is automatically controlled by the float, and a reverse bend can be installed when the water is discharged.
How do you unclog a flush toilet? Toilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More
1. Before the installation of the toilet, check whether there is any blockage of sediment and debris in the sewage pipe, and whether the installation ground is level. >>>More
The smell of the toilet at home is mostly caused by the toilet. When the toilet is dirty, in addition to rolling up your sleeves to clean it, you can also pour Coke into the toilet bowl to deodorize it. Another recipe is to burn matches or candles in the toilet to change the air in the room as it burns. >>>More
At present, there are three standards for the installation size of flush toilets in China: 200 mm, 300 mm, and 400 mm. 300 mm is the majority.