-
Anonymous users2024-01-23This structure, as a pressure lock, is a question of whether the screw is installed - this screw can decide whether to use the function of whether to use a handle to lock the door!
You have to remove the inner lining, and bring the wire bar on the handle [If you have a problem with the car, ask the car master. Professional technician in 4S shop, 10 minutes to solve. 】
The door buckle can be removed through the screws behind the door, and when installing, the handle inside is straightened, aligned with the iron bolt between the manual small safety and the handle, and then the screws are aligned with the female screws on the front handle and tightened. >>>More
Generally, it can be opened on both sides, but only the indoor can be locked, so it is safe. Let's go to the lock shop and ask.
If you are locked inside, and you happen to have a thin and hard thing with you, you can insert him into the upper and lower screws, unscrew the screws, open the outer cover of the door lock, and there should be a rectangular lock cylinder in centimeters, and turn him clockwise to open the door.
There are several screws in the door lock, there are two door handles, the normal installation is on the indoor façade, loose on the good can be, if it also moves, it is not this problem, you need to remove the panel to see the panel fixed circlip problem, if you can't end up with a sample to buy a new one.