-
Anonymous users2024-01-23Your kind of failure is an intermittent failure.
The air switch for home use only has a short-circuit overload protection function.
Cause of air switch tripping:
1. The line grounding on the load side of the air switch is short-circuited.
2. The air switch is damaged and malfunctioning.
3. The air switch is too small, and the overload will cause tripping.
Solution: 1. Check the line insulation on the load side at the beginning of the air, and use the multimeter resistance file to measure the line insulation.
2. Check the air switch and replace it with a new one.
Hello, please check what is the rated current of your air switch? In this case, most of the rated current of the empty opening is relatively small, and the load current is close to the rated current of the empty opening, and the empty opening itself is not necessarily damaged. Generally, the working current of the induction cooker is about 9 amps, I guess your air opening should be 10 amps or 16 amps, you can try a new one of 25 amps or 32 amps.
The air switch in your kitchen always jumps, there are no high-power appliances, you can change a new air switch, and there is no more money, it is more than 20 yuan, if you jump again, that is, there is something wrong with the electrical equipment, you will send the appliances one by one, to see if it is a specific water heater jump, or a rice cooker work jump, or a microwave oven jump, find out the specific electricity, and measure it with a shake meter.
The toilet bowl has dirt, which is the result of the toilet bowl being used for many years, and the ultimate reason is that the façade of the toilet drain is not painted with a glaze coating.
The floor of your home is a prefabricated cement hollow core slab, which will be like this, and you need to re-waterproof it where there is a water source upstairs.
After disconnecting each appliance or all electrical appliances, push it up for 5 minutes and still trip, replace the circuit breaker, which can be replaced with a leakage protector.