-
Anonymous users2024-01-23Hello, please check what is the rated current of your air switch? In this case, most of the rated current of the empty opening is relatively small, and the load current is close to the rated current of the empty opening, and the empty opening itself is not necessarily damaged. Generally, the working current of the induction cooker is about 9 amps, I guess your air opening should be 10 amps or 16 amps, you can try a new one of 25 amps or 32 amps.
-
Anonymous users2024-01-22Close the main switch as soon as possible and connect the wire end, otherwise it is easy to leak and touch the electricity.
-
Anonymous users2024-01-21If the contact is not good, check the thread and reconnect it.
-
Anonymous users2024-01-20If the end of the wire is empty, you can use a screwdriver to tighten it, and the premise is to cut off the power.
The kitchen exhaust fan keeps squeaking, which should be caused by the oil smoke adhering to the exhaust fan, resulting in a decrease in lubrication and a greater resistance.
You're an older tank fitting. Mainly 4 parts, that is, the water plug is aging or there is scale caused by the loose sealing, the water seeps into the potty, the water level in the tank drops, the float (2) falls, and the water enters (3) to replenish, and it will make a sound. You can see if the water blockage can be cleaned up, or you can only replace it with a new one.
The switch is connected to the zero line, turn off the live wire, and the zero line induces leakage from the capacitance to the ground, and there will be a faint glow phenomenon after the switch is turned off, and replacing the zero line of the live wire is the best solution.
It is C16, 16A, if you use a larger power appliance at the same time, it will be smaller, and adding an induction cooker to the electric pot, adding an electric kettle to the electric pot, etc., may cause the current to trip, preferably larger 20 or 25.
The vibration of each mechanism in the work of the car will emit a variety of sounds, but the sound does not mean that the car is faulty, in order to avoid unnecessary disassembly, we must first distinguish between normal sound and abnormal noise. The normal vibration sound of each system component (such as the noise on the surface of the engine), the impact sound of the gear when shifting, the air intake sound and exhaust sound of using gas as the working source, and the gear meshing noise are all normal sounds. Abnormal noise (abnormal noise) can be divided into slight noise, general noise and malignant noise according to the impact on the performance of the car. >>>More