The air switch in my kitchen has been tripping recently, and there are no high power appliances, wha

Updated on Kitchen 2024-03-22
2 answers
  1. Anonymous users2024-01-23

    The air switch in your kitchen always jumps, there are no high-power appliances, you can change a new air switch, and there is no more money, it is more than 20 yuan, if you jump again, that is, there is something wrong with the electrical equipment, you will send the appliances one by one, to see if it is a specific water heater jump, or a rice cooker work jump, or a microwave oven jump, find out the specific electricity, and measure it with a shake meter.

  2. Anonymous users2024-01-22

    One is that the air switch itself is faulty, the second is that the electrical appliances have poor contact, and the third is that the power of the air switch is small, although there are no high-power electrical appliances, but at the same time there are many electrical appliances, resulting in power overload.

Related questions
3 answers2024-03-22

The power of the four bulbs of the bath bomb is generally not less than 800W, and the power of the small kitchen treasure is generally about 2500W, so that the total power will reach 8300W (or more), so that the current of the line will reach 38A, if only an air switch is set for the line, then the air switch will use 40A, and the total air switch should not be less than 63A.

3 answers2024-03-22

There are several reasons why a switch trips. 1 overload, 2 short circuit. 3. The switch itself is the reason. If the line or load is fine, it could be the switch itself. >>>More

2 answers2024-03-22

If you do what you say, it should be caused by overvoltage. You should be using the DZ4732A switch. I don't know what brand it is. But if the voltage exceeds 240, it will jump. The electricity consumption during the day is small, the voltage drop is small, and the temporary electricity is unstable.

4 answers2024-03-22

Hello, please check what is the rated current of your air switch? In this case, most of the rated current of the empty opening is relatively small, and the load current is close to the rated current of the empty opening, and the empty opening itself is not necessarily damaged. Generally, the working current of the induction cooker is about 9 amps, I guess your air opening should be 10 amps or 16 amps, you can try a new one of 25 amps or 32 amps.

1 answers2024-03-22

Unplug all the electrical appliances on the socket, also trip, check the socket, if not, plug in the appliances one by one.