The lights in the living room are flashing, half on and half off, do you want to buy a new lamp, dea

Updated on Living room 2024-03-22
4 answers
  1. Anonymous users2024-01-23

    No need to buy a new one, show you a way.

    With this design, you can see that this single is divided into two halves for power supply, half is controlled by a rectifier, and the other half is broken, it must be a problem with the rectifier, or the connection failure of the entire light strip, you can replace the light strip or replace the rectifier, and the price is relatively cheap.

  2. Anonymous users2024-01-22

    1.The lights in the living room flashed, half on and half off.

    2.In fact, it is caused by the damage of the light strip on the right.

    3.It's very simple, you can buy the same specification of light strips online, or you can buy new lights, but the cost is higher.

  3. Anonymous users2024-01-21

    It's better to replace it quickly, in case the line continues to short circuit and cause a fire, it is not good, it is better to deal with it as soon as possible.

    The safety of your family is paramount.

    I wish the landlord good health and all the best, and don't forget to reward me with an adoption.

  4. Anonymous users2024-01-20

    Change it to a new one, or change the lamp, now it is all LED, and it takes a long time.

Related questions
The LED lights in the living room are half on and half off, and the two halves are flashing each oth
3 answers2024-03-22

I don't know how many drivers you have in this lamp, from the fault phenomenon it looks like it is caused by poor contact, it is recommended to check all the lines to see if there is any bad contact, reconnect it, open the driver, and see if the circuit board inside is warped or broken. Re-weld.

The living room lamps LED crystal lights are half on and half are not
2 answers2024-03-22

Generally, LED crystal lamps have several drivers, which may be broken and can be returned to the factory for repair within the warranty period.

Why is the indoor ceiling light half on?
1 answers2024-03-22

You're talking about multi-level control of one light. Some switches are pressed several times in a row, and each time they control a different number of heads.

The new LED bulb in the living room is only half bright, and the non-bright area is replaced with th
2 answers2024-03-22

It is recommended to check the wiring of the lamp holder to see if there is a phenomenon of poor contact, and some lights have a counting setting, pressing the switch once may be half bright, pressing twice to fully on, you can see if this is the case.

The crystal lamp in the living room is only half lit in the first gear, which is not the reason for
3 answers2024-03-22

No. There are several reasons why this lamp does not work: >>>More