-
Anonymous users2024-01-23This is a normal built-in downlight. You can remove the stainless steel disc of the lamp by hand, pull it down. Just change the lights and push them in.
-
Anonymous users2024-01-22Call the LED downlight, use a knife to cut in from both sides, and pull down vigorously.
Some of the accessories bought on the Internet, it would be good to change the light strip.
This light is not LED, just change the tube. The principle of installing the aluminum gusset is to use the triangular keel to clamp the gusset, you use the blade to insert it from the seam of the gusset next to it, and take a piece of the gusset down with a little force under the gentle stay, the lamp is generally placed on the top of the lighting module, look at the clip card, you can take the clip to move to the place where you take the gusset, you can take the broken lamp, it should be four needle-like feet, you can take it off when you pull it out, After getting this bad one, going to the hardware store is better than buying one and replacing it. Don't worry about breaking the gusset, it's aluminum, it's not easy to break, just replace it and stick the gusset back. >>>More
If the bathroom needs to be moisture-proof, it is recommended to change to a waterproof lamp with 100% lighting.
Because the lights in the toilet are basically put together with our bath bomb, it is necessary to buy a special lamp when replacing it. As long as this good group lamp is sold in any hardware store, and then open the lid of our bath bomb, its 4 corners will be unscrewed or 4 screws of orange socks, and then the bad lamp is unscrewed, the good lamp is installed, and then the cover on the bath bomb can be buckled.
There is an app called 58 to the house, which seems to have an electrician coming to the door, and it can also be found in WeChat. Generally, there are many home appliance maintenance shops, and there are electricians in the lighting shops, as long as you give money.