-
Anonymous users2024-01-23Soak it with water for a while, then wipe it off with a rag - latex paint is a water-based paint, which can be softened and loosened with water.
-
Anonymous users2024-01-22It depends on whether your aluminum gusset is coated or roll-coated. If you want to be laminated, you can't soak in water, you can only wipe it with a wet towel. If it is roll-coated, you can soak it in water for a few minutes, and you can wash it off in water.
Latex painted walls can be integrated into suspended ceilings. Suspended ceilingsDon't get in the way. The thing about the wall.
Since the top surface is not absolutely flat, if you spray directly, it is easy to cause unevenness! >>>More
The finish of the spray is high, the surface of the roll is rough (the thinner the roll, the less obvious, the finer the drum hair, the less obvious), strictly speaking, it is good to spray, but the difference between the top effect is not very big, the wall will see the effect nearby, the process of spraying requires on-site protection in place, the protection is not in place and it is difficult to clean up, and the top surface can be sprayed, but if the wall needs to be separated, it still needs to be rolled, so it is generally not too differentiated, as long as the paint base is flat, you can.
I recommend using a yellowish one,,。 In this way, the space is a little more overall and more warm, and the effect of using a light strip is not as good as using a small lamp tube to make it softer. But it's more power-hungry than the light strip...
Is there a base layer for that shape? This should be the case when the inside is damp – at least the putty layer hasn't dried yet, and if it's not dry inside, there will be such a problem.