Will seamless tiles in the bathroom leak water?

Don't be anxious if the bathroom leaks, first observe the leakage, first judge the leakage place of the toilet leakage, do the leakage test and analysis, and find the problem of water leakage. There are generally three types of water leakage: >>>More

It is necessary to judge the leakage situation according to the specific leakage area of the bathroom, and then take relevant measures to remedy it. >>>More

In the case of cracks and water leakage on the floor of the toilet room, different treatment methods should be adopted depending on the size of the cracks. Generally, the surface layer is removed locally along the crack, exposing the crack part of the waterproof layer, if the crack is wider, the width and depth of the crack are not less than 10mm of the trench, after removing the floating ash debris, the sealing material is embedded in the trench, and then the coating film waterproof layer with carcass reinforcement material is laid and the original waterproof layer is overlapped and sealed, and the surface layer is repaired after testing the water without leakage. If the crack is fine, the ground surface layer can be removed without shoveling, and after cleaning the crack surface, a certain width of synthetic polymer coating film similar to the color of the ground can be applied along the crack.

To cause the bathroom to leak downstairs, you can do it by following the steps below: >>>More

It is best to knock off the tiles and redo the waterproofing, because you don't know where your mistakes are, which will leave hidden dangers, and you must not make up. In the past, some people also used glass glue to caulk and make colorless and transparent waterproofing on the tiles (like a latex white film after brushing), which can only be managed for a period of time. Therefore, I advise you that long pain is better than short pain : >>>More