Can the bathroom leak without smashing bricks to repair the waterproofing?

It is best to knock off the tiles and redo the waterproofing, because you don't know where your mistakes are, which will leave hidden dangers, and you must not make up. In the past, some people also used glass glue to caulk and make colorless and transparent waterproofing on the tiles (like a latex white film after brushing), which can only be managed for a period of time. Therefore, I advise you that long pain is better than short pain :

Knock out the tiles, check the drains and inlet pipes, and solve the root problem.

The reason why many people's homes will leak, most of the cases are caused by the destruction of the bathroom waterproof layer, due to the lack of waterproof knowledge of many owners, do not know the structure under the tiles, often think that the bathroom at home has been waterproofed, there will be no more water leakage, in fact, the bathroom waterproof layer is not done or cracked, which will lead to a part of the bathroom water seeping from the gap to the downstairs, which is the main reason for the bathroom leakage.

2. Bathroom sewer pipes and leakage.

I believe we all know that the water on the bathroom floor is discharged from the floor drain out of the room, but many houses are renovated, because of the various inaccuracies between the bathroom water pipe and the building structure, resulting in a gap between the water pipe and the building entity.

After working hard and saving a lifetime of savings, no one wants to see their own nest, and after a few years of living, the pipe root on the top of the bathroom began to leak.

If you really encounter this kind of problem, don't worry, Brother Wei Xiu doesn't smash a brick, and solves the problem in 2 hours.

The method used by Brother Wei Xiu in dealing with it is to accurately find the leakage point, drill holes, inject waterproof materials into it, plug the leakage point, and reconstruct the waterproof layer. The principle used is to make the waterproofing material chemically react between the sand-gray layer and the protective layer to form a waterproof layer again, and then achieve the waterproof effect.

The advantage of this technology is that at the same cost, the construction period is short. 2 hours can solve the problem. However, this technique also has relatively high requirements for the master.

In addition, there are many reasons for water leakage in the bathroom, for the above two situations, the use of this technology is the most cost-effective way, if the bathroom leaks, it is still recommended to find a repair engineer for testing.

Yes, it mainly depends on how you seep water, the original waterproof layer is damaged, seeping from top to bottom, you can use Qinglong No. 3 to brush a layer on the surface of the tile, if it is buried in the bottom of the water pipe seepage out, or to smash the tile, or make the water pipe into an open pipe, the previous one is not used, so that the ground is still leaking, and the water leakage is OK under the brush Qinglong No. 3. Hope the answer can help you.