-
Anonymous users2024-01-23It is necessary to judge the leakage situation according to the specific leakage area of the bathroom, and then take relevant measures to remedy it.
First of all, it is possible that the shower head is not in close contact or is aging, resulting in water leakage. At this time, it is necessary to replace the bathing equipment as soon as possible.
It is also possible that the place where the door threshold meets the ground, the position of the sealing has been damaged, and water leakage has occurred, at this time, it is necessary to keep the bathroom dry first, and then glue in time.
> In addition, the water pipes in the bathroom have been ruptured, and there will also be water leakage problems. At this time, it is necessary to determine which part of the water pipe is leaking, if it is a directly exposed water pipe, then directly cut off the sluice gate and replace the water pipe.
If the water pipes are hidden inside the furniture or buried under the floor tiles. Then take it a step further by removing the furniture or digging the floor tiles first, cleaning the water and then replacing the water pipes.
In a humid place like a toilet or bathroom, a layer of waterproof or waterproof glue is generally made when designing. If there is water seepage in the waterproof place, it is likely that the gum is aging and corroding, if this is the case, just re-apply a new layer of glue after cleaning.
-
Anonymous users2024-01-22If the pipe is leaking, you can only plane the tiles, change the pipes, and redo the waterproofing. If there is water seepage on the surface of the restroom, the following methods can be used to repair it:
1. Treat the dust, oil, and stagnant water on the surface, and keep the surface dry;
2. On the entire surface that can be drenched with water, such as: tile surface, tile joint, wall joint, pipe root and other parts, paint Kelin transparent waterproof adhesive, and do not miss the coat;
3. Weak links such as corners, wall edges, and pipe roots should be reinforced with Kelin transparent waterproof adhesive.
Don't be anxious if the bathroom leaks, first observe the leakage, first judge the leakage place of the toilet leakage, do the leakage test and analysis, and find the problem of water leakage. There are generally three types of water leakage: >>>More
To cause the bathroom to leak downstairs, you can do it by following the steps below: >>>More
Isn't it waterproof? The upstairs bathroom of my mother-in-law's house is not waterproofed, resulting in the top of the bathroom at home is still peeling, although it has been remedied, it is still useless!
In the case of cracks and water leakage on the floor of the toilet room, different treatment methods should be adopted depending on the size of the cracks. Generally, the surface layer is removed locally along the crack, exposing the crack part of the waterproof layer, if the crack is wider, the width and depth of the crack are not less than 10mm of the trench, after removing the floating ash debris, the sealing material is embedded in the trench, and then the coating film waterproof layer with carcass reinforcement material is laid and the original waterproof layer is overlapped and sealed, and the surface layer is repaired after testing the water without leakage. If the crack is fine, the ground surface layer can be removed without shoveling, and after cleaning the crack surface, a certain width of synthetic polymer coating film similar to the color of the ground can be applied along the crack.
Can you describe it specifically?,Is it the water leaking from the bathroom?。。 Can you describe the specific leakage location? It's too simple to write like this.