-
Anonymous users2024-01-23There is no way to say that you can put a screw on the door frame and be cocked. Maybe it's a little kid. It's a joke.
Inadvertently put it there. Maybe the child just felt it was fun and put it there casually. Find it in time, take it out in time, this should not be deliberately put by others, it should be a child.
The actions of small children.
-
Anonymous users2024-01-22If the wall is flat, remove the screws and stick the door to the wall.
If the wall is uneven, use a wooden block to level it and fill the space with foam glue.
-
Anonymous users2024-01-21It's possible that the theft won't work out.
Keep a snack on it.
-
Anonymous users2024-01-20It shouldn't be intentional, but the construction needs to be forgotten to take it down.
-
Anonymous users2024-01-19It's very unlikely that a thief will step on a point, or it may be a child mischievous, it's okay, it's okay.
You can change to a thicker self-tapping screw, but this will not last too long, a year or two. At that time, it will be removed and re-punched in another place, tapped, and the handle should cover both the new hole and the old hole, which will also work. (Drill bit + wire tapping is less than 10 yuan in total).
The methods of removing the foam glue are: you can use soap and a small amount of ammonia and turpentine to remove the foam glue on the door; You can also use a thinner with a higher concentration, but you should choose a material that is not paint, otherwise the color of the paint will be brushed off together; It can also be scalded with boiling water, and the foam glue on the door can also be removed; It can also be erased with a 4B eraser.
There must be steel bars inserted into the wall above the door frame, and then there is cement grout and caulking, so that it will be stable.
Is there no gap underneath?
Or is the gap below one side big and the other small? >>>More
Security doors, including door frames and doors. If you want to change it, you must change it with the door frame, which is matching.