-
Anonymous users2024-01-23The main thing is whether there is water seepage or leakage in the bathroom of your house, or leakage downstairs, if it leaks, only knock on the floor tiles and redo it. If there is no leakage, you can go to the market waterproofing store and buy a bottle (depending on the volume) of the external waterproofing agent (colorless) and brush it three times (including wall tiles). I wish you success.
-
Anonymous users2024-01-22There is no other way, or you don't want to take a shower in the bathroom. The ground is not flushed with water, which is also better.
-
Anonymous users2024-01-21If it is a commercial house, it may not be a big problem, because the civil construction has been done again. If it's a self-built house, that's a big problem. It must be redone.
-
Anonymous users2024-01-20Look at whether the tile joints on the ground are too large, if they are too large, you can use white sealant to deal with them.
-
Anonymous users2024-01-19There is no good way to do it except for making a new one, but if you take a bath, you can use a finished shower room or bathtub, and it is not a big problem to be careful not to have a large amount of water flowing on the ground.
-
Anonymous users2024-01-18In fact, the concrete itself can be waterproof for a short time, in the case that there are no gaps and holes in your bathroom floor, you only need to pay attention to two problems to prevent water leakage, one is that the drainage system does not leak, and the other is not to let the bathroom floor be waterlogged, so these two are generally no problem.
If the whole bathroom is not waterproof before the paving, it is recommended to disassemble and redo it is safer, because once the leakage is leaked downstairs or the partition wall of your own house will be more troublesome, if you just want to do another layer on the tile, there is that kind of film-forming water can be brushed on it, which can block the gaps of the tiles and achieve the waterproof effect, but this is not very long.
If the water cannot be sprayed, splashed, or sprayed onto the socket directly, there is no need to install a waterproof cover. If you want to equip it, it's easy to buy a waterproof and splashproof cover and put it on.
Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing). >>>More
1. Acid cleaner can remove limestone, cement stains, scale on the surface of the cleaning object, as well as stubborn urine stains and oxidized metal stains that are common in the bathroom, such as acidified cleaner. Alkaline cleaners can remove all kinds of animal and vegetable greasy stains and mechanical oil stains, and can remove the wax layer from the floor. Such as special enhanced oil cleaner; Strong waxing water, etc. >>>More
You can also go to the store to buy a water-based plugging king along the tile every few times, but also its waterproof effect.