-
Anonymous users2024-01-23Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing).
For the tile surface, first check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use a stone tile waterproof guard to do waterproofing).
Exterior wall paint can be made waterproof with transparent waterproof repair adhesive.
The product will penetrate into the base layer and make the base layer waterproof. The product is recommended to be constructed in a dry place, the drier the base surface, the deeper the product can penetrate, if the base surface is full of moisture, high density, the material can not penetrate well. Regarding the principle of waterproof plugging, the source of water leakage is not blocked, and the water will only continue to penetrate into the wall, which will exist inside the wall for a long time, and will leak out from other parts of the wall when the water reaches a certain level.
The problem cannot be solved, and only by spraying waterproofing agent on the outside of the roof or exterior wall so that the water cannot penetrate into the wall and flow away can the problem be completely solved.
-
Anonymous users2024-01-22Is the water leak serious? If it is not serious, the leakage will be plugged, and the amount of work is small and the damage is small.
-
Anonymous users2024-01-21As long as you don't leak water downstairs, it doesn't matter, if you want to leak, you have to smash it and do it again.
If the whole bathroom is not waterproof before the paving, it is recommended to disassemble and redo it is safer, because once the leakage is leaked downstairs or the partition wall of your own house will be more troublesome, if you just want to do another layer on the tile, there is that kind of film-forming water can be brushed on it, which can block the gaps of the tiles and achieve the waterproof effect, but this is not very long.
The easiest way to waterproof the bathroom:
Cast reinforced concrete floor slabs. >>>More
It's relatively easy to do it yourself.
First: ground leveling is the uneven place needs to be leveled, so as to save the amount of waterproof mortar and ensure waterproofing. >>>More
It is basically impossible to do bricks that have been plugged into the partition.
Yes, don't you like that floor tile? What questions and answers are there in the pants, if you want to pave from the new one, it is more troublesome, and you have to warp up the previous floor tiles from the new one to disturb the pure paving.