-
A single network cable cannot connect the network modules between the bedroom and the living room. If strung together it is not usable. This problem can be solved by adding a switch at the breakout. The switch can be activated to extend the length of the network and amplify the network signal.
-
It's not connected in series, you need to use a router to connect to 2 places separately.
-
In tandem:
1. Pick up the broadband cat first.
2. Connect the router again.
3. Log in to the router and set it up.
4. PPPOE dial-up, username and password.
In this way, you can surf the Internet on any computer. The router helps you to dial the number automatically.
-
No routing or HUB, no. And according to the PS1, it is estimated that one of the wires is connected incorrectly. It is recommended that the cat of radio and television come out,Directly install a wireless router,Anyway, it's a notebook.,Anywhere you want.。
-
You first understand what the "cross line" and "parallel line" of the network cable are, and you can solve it.
-
If you have a wireless network, you can detect the network signal in all these places.
In fact, it is very simple, first connect a mobile installed network cable in the master bedroom to the wireless router, and then pull a network cable from the wireless router in the master bedroom to the second bedroom, the notebook in the second bedroom can be connected to the Internet with a network cable or with wifi, and the computer in the master bedroom is also connected to the Internet through the network cable to the router. If you want to connect the second bedroom to a wireless router, pull down the second bedroom network cable from the master bedroom, connect a wireless router, and change the IP, if the IP of the wireless router in the master bedroom is. Which secondary wireless router IP change. >>>More
This connection can be realized, and a switch needs to be prepared. >>>More
If the network cable is good and the panel quality is good, in the case of short distance, the impact is there, but not too big. >>>More
Hello: It is recommended that you can use a wireless router plus a wireless network card to solve the problem, you replace the router in the living room with a wireless router, and then install a wireless network card on the desktop computer. This saves you the hassle of wiring.
Lamps and lanterns can't be hung on beams and columns.