What is the standard for the door gap of installing a solid wood door?

Leave a gap between the door leaf and the upper frame.

Leave a gap between the door leaf and the side frame.

Leave a gap between the door leaf and the ground, the outer door, the inner door, and the bathroom.

After the door leaf is installed, it should be flat and vertical, the door leaf and the exposed surface of the door sleeve are flat, the door leaf is opened without abnormal noise, the switch is flexible and free, and the door leaf is tightly combined with the sealing strip after being closed tightly, and does not swing.

Summary. What is the standard for the door gap of installing a solid wood door?

Hello Generally speaking, the gap between the door and the ground must be between 5 8 mm, the gap between the left and right of the door and the door frame should not be greater than 6 mm, and the upper seam of the door can not exceed 2 mm.

Door leaf installation:

1. After the door leaf is installed, it should be flat and vertical, and the exposed surface of the door leaf and the door sleeve should be level; There is no abnormal sound when the door is opened, and the switch is flexible and free;

2. The gap between the door sleeve and the door leaf, the lower seam is 6-7 mm, the door leaf is 40 mm thick, and the other three sides are 2 mm; All gaps are allowed to be tolerances + mm; The door leaf is 50 mm thick, and the remaining three sides are 3 mm; All gaps are allowed to be tolerances + mm; The thickness of the door leaf is more than 60 mm, and the opening surface of the door leaf should be inverted with 3 mm beveled edge, and the remaining three sides are 2 mm; All gaps are allowed to be tolerances + mm;

3. After the door is closed tightly, it is tightly combined with the sealing strip and does not swing.

1. Key points 1. The single-port door sleeve adapts to the adjustable range of the thickness of the door opening

2. The thickness of the double-mouth door sleeve can be adjusted from 0 to 20mm

3. The thickness of the single-port window cover can be adjusted from 0 to 20mm

4. The thickness of the double dumb mouth sleeve can be adjusted from 0 to 40mm

5. Reserve the gap of 15-20mm for beating styrofoam, and the maximum gap is the theoretical value of the width of the mouth line minus 12mm

In practice, it will be reduced by at least 2 mm. For example, the theoretical maximum gap of the 60mm wide mouth line is 48mm, that is, the maximum styrofoam width can be up to 46mm.

If measurements are required, then.

2. Tool preparation

1. Tools 5m tape measure, calculator, pen, marker, if conditions permit, prepare a level corresponding promotional materials 2, form "xxxxxx wooden door measurement sheet".

3. Preparation before measurement 1. Wooden door The main thing to measure for the wooden door is the door opening Before measuring the door opening, it is necessary to confirm the progress of the decoration with the customer 1 What kind of pavement form is used on the ground After the final ground decoration is completed, whether the thickness of the increase on the basis of the original ground can be determined. 2 Whether the tile is pasted in the bathroom, kitchen, and balcony Whether the final thickness of the door opening after the tile is pasted can be determined. 3 Agree on a measurement time with the user.

It is better for the user to be on site