-
Anonymous users2024-01-23Hello, the gap between the door frame and the door hole is 1-2CM, which is easy to blow the styrofoam, and it is better to see the wall cracks after installing the sleeve line.
-
Anonymous users2024-01-221-2mm is acceptable, no matter how big it is, it will affect the aesthetics.
-
Anonymous users2024-01-21On the side with the hinge, you can unscrew the screws, raise the hinge slightly, and adjust the size of the gap on both sides.
1 2 3 Upper edge of the door 1 mm Door vertical seam 2 mm Bottom edge of the door 3 mm.
This part can be glued or filled with cement. When mopping the floor, you should avoid using a lot of water, and use a wet mop. Do not store water, otherwise it will turn black or moldy. When the quantity is small, it dries quickly and does not have a big effect.
Generally, the gap between the door panels of the solid wood wardrobe will be much larger than the gap before the MDF. Because solid wood is to expand and contract. In the manufacturer, it is necessary to keep a gap of 3 to 5mm to avoid the two doors being too tight next to each other due to excessive heat in summer, causing friction and damage to the cabinet doors.
1. Potassium permanganese bairate water.
I put the prepared は high concentration potassium permanganate water (purple zhi) into a syringe and spray it into the hole of the moth. >>>More
The door is the door of the house, the installation effect and quality of the wooden door are related to the normal life of daily life, if there is a mistake in the installation, it takes time to reinstall, which will affect the normal life. >>>More