Where are kitchen wall faucets with double hole spacing of 10 cm? Asked a lot of stores all

That is, the standard size.

15cm, that is, the center of the hot water faucet is 15cm away from the center of the cold faucet.

The specific test is as follows:

In the past, due to the lack of optimism in market technology, the positioning of the workers and masters was manual, which may lead to a little error in the size at this time;

The specific spacing does not have to be 15cm, depending on whether you are installing the mixing valve, and the hot and cold water joints of the return valve are all standard 15cm, so the reserved 15cm can be used;

If you buy a special one, you need to buy the faucet in advance and take it to the site, so that the workers can accurately reserve the size.

Generally, the height distance of the shower hot and cold water inlet is 90cm, the distance between the two joints is 15cm, and the error should be within 5mm, the installation size of the kitchen hot and cold water faucet is 32mm, the aperture of the installation faucet is 25mm, which is the same size as the unified standard, before installing the thermostatic faucet, please check whether the water pipe is hot on the left and cold on the right, remember not to install the hot and cold water pipes wrongly, so as not to make the faucet not work normally.

The standard is 15 cm, and the 10 cm Taobao is on.