-
Anonymous users2024-01-23The diameter of the sewer pipe is 110, and the toilet drain hole is 85, so there is a few centimeters of room to move, but it is best to find an experienced master to install the toilet to be sure. Besides, you can also give way to the handbasin.
-
Anonymous users2024-01-22Yes, expand the hole, re-cut the next section of the pipe, and use the plugging spirit to do a good job of waterproofing.
1. Flexible ventilation tube.
You can try to insert a long, not hard but not very soft, soft snorkel into it, and flush it with water as you go inside, not too strong to avoid splashing, until it is flushed, and then flush. >>>More
Ask a professional technician to see if there is a blockage in the pipeline, or if the sewer pipe is not aligned.
OK. Because carbon dioxide gas is generated in the reaction, the resulting air pressure can be used to unclog the sewer.
The function of the two buttons on the toilet is the same, the small button is to drain half or one-third of the water from the tank, and the large button is to drain all the water at once.
The toilet bowl is easy to be stained with urine stains, feces and other dirt, if you find that there are still residues after flushing, you must use a toilet brush to clean it in time, otherwise it is easy to form macular stains, and mold and bacteria will also breed. In addition to the vicinity of the pipe mouth, the inner edge of the toilet outlet and the outside of the base are places where dirt and dirt are hidden, when cleaning, first lift the toilet seat, and spray the inside with toilet cleaner, after a few minutes, use a toilet brush to scrub it thoroughly, it is best to use a brush with a thin head, so that the inner edge of the toilet bowl and the depth of the pipe mouth can be better cleaned. Then brush the base and other crevices.