-
Anonymous users2024-01-23The scale of the bathroom pipeline is blocked, resulting in a large back pressure on the water flow, to a certain extent, the water heater water-gas linkage device will think that the hot water faucet has been closed and close the gas channel, there is no gas, of course, the fire will be turned off.
It is recommended to clean and descale first, you can buy a set of gas water heater without removing the scale device online, use it to inject descaling agent into the water heater to clean the inside of the water heater, the operation is simple and convenient, and it can be cleaned regularly after use, when this problem can be avoided again. A lot of people have used it, and it really works.
-
Anonymous users2024-01-22The water pressure is too low, and it is solved by installing a booster pump.
The gas water heater is water-controlled and has a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the igniter, and cannot be used. >>>More
A gas water heater can only supply water from one shower faucet, and if it is turned on too much, the water pressure and water temperature are unstable, and as a result, no one can take a bath. But it's okay not to use it at the same time.
Gas water heaters are the best, electric instantaneous water is second, and faucet hot water is recommended to be used sparingly. >>>More
Check the water outlet of the hot water faucet, if it is small, it should be a problem caused by insufficient water flow. >>>More
The electric water heater has leakage, resulting in leakage protection tripping, and the non-grounding wire is the electricity leaking from the electric heating on the water tank, which cannot form a loop, so it does not trip, but in this way, people may have the risk of electric shock when using water, and the ground wire must be connected.