-
Anonymous users2024-01-23The water outlet is small, because of the scaling of the hot water pipeline, the scaling of the hot water pipeline will lead to the increase of the back pressure of the waterway flow, to a certain extent, the water-gas linkage device of the water heater will think that the hot water faucet has been closed and close the gas channel, there is no gas, of course, it cannot be ignited.
You can buy a set of gas water heater without removing the scale dismount online, use it to inject descaling agent into the water heater to clean the inside of the water heater, the operation is simple and convenient, and it can be cleaned regularly after use, when this problem can be avoided again. A lot of people have used it, and it really works.
E1 is a leakage fault (system self-test), turn off the power supply, and power back on later to see if it can return to normal. If it cannot return to normal, you need to contact the manufacturer for processing.
Check the water outlet of the hot water faucet, if it is small, it should be caused by the scaling and blockage of the pipeline and the insufficient water flow. >>>More
First of all, I have to remind you that this question has nothing to do with the brand. >>>More
Generally speaking, the smoke pipe temperature of a gas water heater is around 150. If the space of the ceiling is slightly larger, it will not cause a fire due to heat accumulation. However, if it is too close to the plastic gusset, it is very likely that the gusset will be discolored and deformed. >>>More
The water pressure in the water heater and the water pressure inside the water pipe are the same. If you want to go up to the second floor, the water pressure is normal. OK. However, it is not possible when the water pressure is low. Hope it helps. Have a great day.