-
Slowly becoming less normal. You may be too fast, only one may have a crack, you confirm it and replace it, there is a saying that it can be used normally and it is recommended to replace it for about five years.
-
This may be a crack in the trap, causing water to leak out, you can remove the toilet, if you see a leak, you can use pure cement to adjust some water to knead it soft and fill it, and then install the toilet when it is dry.
-
It should be a crack in the toilet.
-
We all know that there is a water leak, and we don't remove it to repair it.
The general procedure is:
1.Close the angle valve under the toilet tank (some people call it the "figure-eight door"); >>>More
If the flushing is not smooth, and the toilet bend is empty, it is your toilet drain that is blocked or installed unreasonably. If you flush smoothly and there is still no water, adjust the flush valve.
Oxalic acid, daily miscellaneous, hardware stores are sold, two or three yuan a bottle, (the kind of bottle that hangs water in the hospital) poured into the toilet and waited for ten minutes to flush with water. Note: Do not dilute with water first, if you have a chemical taste, please turn on the exhaust fan. >>>More
Yes, soak it with toilet cleaner, wash it again after a day, don't use steel wool balls or sandpaper, it will be difficult to scrub the glaze after grinding it off, drop a little more toilet cleaner, and don't rinse it with water before soaking.
Since there is such a thing as a fee, simply replace it all, because once it is fixed, it is impossible to replace the rubber pad separately in the future, otherwise you will have to disassemble it again.