Please ask about the choice of the height of the keel of the solid wood floor

The thickness of the solid wood floor is generally 18mm, plus the height of the wooden keel and the moisture-proof plastic layer, it is generally about 28mm; The total height is about 48mm. Generally not more than 50mm to measure according to these and the actual height of your house to find the right height, the keel is generally made of 3cm 4cm wood.

The key issue in installing a wooden keel is to first determine the spacing of the keel, which is related to the length of the floor chosen. At present, the floor length standards on the market are 91cm and 90cm, and 91cm accounts for the majority. It is good if the consumer can choose the floor before laying the keel, so that the keel can be laid according to the length of the selected floor.

Because the keel is often laid at the beginning of the carpentry process, many consumers have not paid attention to the floor or are not sure at this time, so it often happens that the floor bought home does not match the wooden keel that was originally blindly laid, which causes a lot of unnecessary trouble.

Landlord, the keel height of the solid wood floor can be measured according to the actual height of your house, both according to the actual situation of the customized height, the keel is generally made of 3cm 4cm wood, so there is no better to say.

This depends on the height difference between the living room and the bedroom after the living room is tiled, and the solid wood is paved, preferably as close to the height of the living room as possible.

Now cement is more expensive, more than 500 per ton, so try to use keel. It is also convenient to change it in the future.

Bell Floor, Home, The Beginning of Dreams].

Use 3 4 wooden squares to make keels.

There are several types of keels, and the price is not the same, and the price of the high and wide ones is also high.

The wooden floor of the basketball hall is composed of keel, rubber cushion, and solid wood floor (liner) surface, and the more common solid wood floor specifications and sizes are more, the general standard size is: 1810mm 69mm 22mm, of which the thickness of 22mm is the mainstream wood floor specification. The thickness of the moisture-proof film layer of the wooden floor of the basketball hall is 1220*2440*12 thickness of the wool board layer, and most of the keels are made of pine, mainly Northeast larch, with specifications ranging from 40*50 thickness to 50*80 thickness; The thickness of the bottom elastic rubber pad is 15-20 thickness, 80*80mm; The wooden floor of the basketball hall should meet a number of special requirements, including the rebound coefficient of the ball game of 90%, and the rebound coefficient of the floor should be uniform, and the difference should not exceed 1%.

Therefore, when we choose a panel, we must look for a professional sports floor manufacturer.

The national standard for sports wood flooring in basketball halls is the variety, specification, grade, quality and moisture content of wood material when laying should meet the needs of the construction site, and the moisture content should be lower than 18. All kinds of sports wood flooring, wood board surface layer and base layer nails must be firm and not loose (or sticky firm), and the glue used for pasting must meet the design requirements. Among them, the panel of the wooden floor of the basketball hall is the key material of the sports wood floor.

The price of sports wood flooring varies greatly depending on the panel. Our common wood flooring has maple, oak, maple birch, etc., the price of these materials is not the same, maple is relatively more expensive, grade A is more expensive than grade B flooring, and imported domestic materials are expensive.