The furniture has been painted, and the paint color is a little wrong, how to change it

Adjust a little, the specific process is as follows: varnish process (three bottoms and two sides or three bottoms and three sides) 1, first clean the surface of the furniture, if there are pencil marks or other things, use sandpaper to grind them off; (Note not to polish the spacing edge white) 2. Spray the primer once, and use putty after drying (putty is generally mixed with color powder, cooked rubber powder, and double fly powder to mix the color of the putty is darker than the color of the plate) to fill the pores of the board; 3. Use sandpaper to polish the surface of the board or wood lines. 4. Spray the primer for the first time. >>>More

Clear paint and sabrile paint are the best, because the concentration of white and black paint is large and more, and there is a certain concealment of furniture and wood, and it is not a good thing to paint more, no matter how good the paint is, it will be somewhat toxin

Solid wood furniture should be polished and smoothed, and the putty should be patched, and the effect will be good in the paint, which is the case in our factory.

The environment is very important, the spray paint should be free of dust, the primer should be thick, the polishing should be good, and the topcoat should be sprayed out to be shiny and have a feel.

The first time to do PU low sealing, it is recommended to use a brush brush, after drying, fill the ash, and then polish and smooth, the second time the surface is sprayed with a small amount of PE transparent bottom, as long as there is no pinhole on it, it is OK, the third time is the topcoat, depending on what kind of topcoat you use, if the color repair technology is not good, you must first apply the color paint and then spray the varnish, the technology is good, and the color paint will be OK if you do not repair the color, and the varnish will be sprayed directly. I'm talking about this is the practice of high-end furniture, if you don't need to be so high-end, you can save the second PE low.