-
Anonymous users2024-01-231. Clean the surface of the furniture first, if there are pencil traces or other things, grind them off with sandpaper; Do not whiten the spacing edges when sanding.
2. Spray the primer once, and after drying, you can use putty (the color of the putty is darker than the color of the plate) to fill the pores of the board.
3. After the putty is dry, use sandpaper to grind the excess putty on the surface of the furniture clean;
4. Spray 2 3 times of primer; Spray the primer again and hold it quietly because wait for the front side to dry quickly.
5. Polishing the primer.
6. Spray the topcoat twice; (Minimize airborne dust when spraying topcoats).
Hello、Wooden panel furniture spray white paint is the same practice、(Ash - spray primer - sanding - spray topcoat)。。 Thank you for adopting...
Adjust a little, the specific process is as follows: varnish process (three bottoms and two sides or three bottoms and three sides) 1, first clean the surface of the furniture, if there are pencil marks or other things, use sandpaper to grind them off; (Note not to polish the spacing edge white) 2. Spray the primer once, and use putty after drying (putty is generally mixed with color powder, cooked rubber powder, and double fly powder to mix the color of the putty is darker than the color of the plate) to fill the pores of the board; 3. Use sandpaper to polish the surface of the board or wood lines. 4. Spray the primer for the first time. >>>More
Clear paint and sabrile paint are the best, because the concentration of white and black paint is large and more, and there is a certain concealment of furniture and wood, and it is not a good thing to paint more, no matter how good the paint is, it will be somewhat toxin
Tone it down a bit, and the specific process is as follows: varnish process (three bottoms and two sides or three bottoms and three sides). >>>More
The first process is to apply coloring oil before painting pine furniture, and the furniture with this oil can be better painted. >>>More