What do you need to pay attention to when installing a toilet

Toilet Installation:

The pit spacing should be consistent, the caliber is aligned, the bottom is sealed with putty, and fixed with special screws, 24 hours after installation shall not be used, shall not be sealed with cement, after 24 hours, the water tank water is flushed, and the water flow should drift and have a "cooing" sound.

b7%bf%ce%dd%d7%b0%d0%de%ca%b1

The installation of the toilet is generally done by a professional master, and it is necessary to understand it as an owner, so as to know how to check the quality of the installation. Let me tell you about the precautions for installing a toilet:

First, after the receipt of the face to face acceptance of the installation of the toilet should go through strict quality inspection, such as water testing, visual inspection of appearance, etc., products that can be sold on the market are generally qualified, but remember, no matter how big the brand, but also in front of the merchant to open the box and inspect the goods, check whether there are obvious defects and bruises, and whether there is color difference in each part.

Second, check and pay attention to adjusting the ground level After buying a toilet with the same wall spacing size and sealing cushion, you can start installation. Before the installation of the toilet, a comprehensive inspection of the sewage pipe should be carried out to see whether there is mud, sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation position is horizontal. Cut the drain short, and if possible, make the drain 2mm-5mm above the ground.

3. Check whether there is leakage after debugging and installing the water tank accessories Check the water pipe first, and rinse the pipe for 3-5 minutes to ensure the cleanliness of the water pipe; Then install the angle valve and the connecting hose, then connect the hose with the installed water tank fitting inlet valve and connect the water source, check whether the water inlet and sealing of the inlet valve are normal, whether the installation position of the drain valve is flexible, whether there is any jamming and leakage, and whether there is any leakage and installation of the inlet valve filter device.

Finally, test the sewage effect of the toilet, the method is to install the accessories in the water tank, fill it with water, try the flushing of the toilet, if the water vortex is very rapid and flush quickly, it means that the water is unobstructed, on the contrary, to check whether there is a blockage.

Mainly align the water outlet of the toilet with the sewer mouth, and seal the gap between the toilet bowl and the ground with glass glue after straightening the toilet.

1. Before installing the toilet, it is necessary to make calculations and various accurate measurements to ensure that the toilet is installed correctly.

2. To check the sewage pipe of the toilet bowl to see if there is a blockage in the pipe, you also need to check the levelness of the ground. The sewer pipe also needs to be shortened, but it needs to be at least two centimeters higher than the wall.

3. In the process of installation, the bottom surface of the toilet needs to be covered with glass glue during the fixing process. However, it is necessary to control the size of the gap between the toilet and the wall, and the toilet products need to be aligned.

4. After installation, it is also necessary to see whether the toilet flushes smoothly and whether the switch is normal.

5. After installing the toilet, you need to check the water pipe and flush it for a few minutes to allow the pipe to be flushed.

6. After installation, connect the water pipe. Then check the tightness, whether the toilet is in normal use, and whether the drainage pipe is smooth. For household water pipes, the water pressure is generally very stable, and the toilet tank is filled with water.

Press the flush switch of the toilet bowl to see if the toilet drains smoothly and whether the drainage performance is good. If the water flow is relatively fast, it means that the drainage is very smooth, if the water is not in the water for a long time, you need to see if the pipe is blocked.

This does not affect emissions.

Question: Can you install a siphon toilet (squatting toilet has a water trap).