-
If you ventilate for two days, you can. If it is not ventilated, it is better to wait every other week.
1. The floor tiles are a mixture of cement and yellow sand, mainly yellow sand, only a small amount of cement, and basically dry, no need to wait for a long time to solidify.
2. When laying the floor tiles, after being hammered hard by a rubber hammer, it has been mixed with the yellow sand below, and it will not move the position much.
-
What is the situation:
1. For normal life, if the outdoor temperature is about 20 degrees, two or three days will be fine.
Second, if you want to install equipment, (water heater) small parts, etc., it is best to wait for about a week.
-
Preferably after 1 week! If you're in a hurry for 3 days!
-
You can step on it in 48 hours.
-
If the cement dries quickly! It can be used in 2 days. ·!
Are you asking about the implementation time of JGJ298-2013 "Technical Regulations for Residential Indoor Waterproofing Engineering"? >>>More
After the wall is renovated, the water and electricity have also been changed, and the waterproofing of the kitchen and sanitation must be done before starting to tile.
Bathroom
Waterproof practices >>>More
Bathroom tiles have been pasted with water leakage, first determine the location and cause of the leakage, the water pipe first pressure to see if the leakage is not leaking, it may be a waterproof problem, or it may be the main road leakage, check one by one. If the waterproofing is not done well, it can only be smashed the tiles, and the waterproofing is done from the new, and the closed water test is done to ensure that there is no leakage, and then the bricks are laid from the new.
The use of floor tiles in the bathroom is a very ingenious thing, and choosing the right floor tiles can make our life more convenient and comfortable. The bathroom wall is suitable for antique bricks, and the ground is not suitable, so I will tell you what bricks are used for the bathroom floor! >>>More