-
Anonymous users2024-01-23For example, when taking a bath, there is water on the ground in the bathing part of the wet area, and the toilet or washbasin is dry when there is no water on the ground, and the middle is separated by a wall (door) or partition.
The dry and wet partition is to separate the bathing place, because the basement where the bath is taken is called the wet area, and the other is the dry area, which is the washing place and the toilet bathing place are separated, and you can go to the toilet or take a bath alone, which will not affect others to go to work in the morning to wash and make up, and there is a door between them.
-
Anonymous users2024-01-22Wet and dry separation in the bathroom.
General dry and wet separation includes: separation of washbasin and bathroom; Or the separation of the shower area from the toilet and basin area. Dry refers to the sink, wet refers to the bathroom.
Advantages and disadvantages of wet and dry separation
Pros:
1. High security.
After the separation of dry and wet, it will not slip due to the splashing of water on the floor, and some electrical appliances in the bathroom space can also reduce the damage of water vapor to its corrosion, and reduce the probability of accidents such as leakage.
2. Increase the life of the equipment.
Moist air can infringe on washing machines and wooden cabinets in bathrooms. For example, water vapor can corrode the motor of a washing machine, causing it to rust and shorten its service life, and wooden cabinets will be deformed by moisture.
3. Sanitation and environmental protection.
The cabinet of the bathroom sink is placed in the bathroom for a long time, and the moisture will be relatively large, and it is likely to be corroded by water vapor for a long time, resulting in the peeling off of the wooden board layer by layer, and if the bathroom cabinet is too wet, it is likely that there will be cockroaches, spiders and other insects.
4. Save cleanup.
The design of dry and wet separation is mainly simple, and its practicability is relatively strong. Daily cleaning is also relatively convenient, and the dry cabinet can be gently wiped with a rag.
5. Good warmth.
The design of dry and wet partitions can allow water vapor to gather in a space, but it is more or less a problem, which can better avoid the diffusion of hot air, and the warmth is better than that of bathrooms without dry and wet partitions.
Cons:
1. High cost.
Although there are many advantages of wet and dry separation, it is not suitable for any house type. To be precise, it is generally only suitable for the current new house, and it is a relatively large house. Even if some old houses can be renovated, the project is more troublesome and the cost is quite high.
2. Large area.
Generally, the requirements for the area of dry and wet separation are still very large, and the compact house type will be cramped after the separation of dry and wet bathroom.
-
Anonymous users2024-01-21The separation of dry and wet in the bathroom can generally be understood as the washbasin (basin) and the toilet and the shower part are arranged in two areas The washbasin (basin) The washing machine and the toilet and the shower part are arranged in two areas. The above photos are excerpted from the Internet.
-
Anonymous users2024-01-20The dry and wet partition separates the bathing place, because the basement where the bath is located is called the wet area, and the other is the dry area.
-
Anonymous users2024-01-19It is the place to wash and the place to go to the toilet and take a bath separately, you can go to the toilet or take a bath alone, it will not affect others to go to work in the morning to wash and make up, what are you doing, there is a door between them.
1. You can put 70 cm wide, from the ground to the top of the empty wooden frame partition; You can also paint the screen with lacquer, and a glass partition with a push and pull is more suitable. >>>More
1. The dry area is designed outside the bathroom.
Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More
The main thing about the dry and wet separation of the bathroom is to make a separate shower room, so that the water during the bath will not flow to the entire bathroom, and it is expected that the decoration trend of 08 will be more effective, and some fancy decorations and impractical functions will not be favored.
The bathroom should be waterproofed, so the general construction practice is thicker than the usual floor practice. Moreover, the floor of the bathroom is generally lower than the floor floor outside to prevent water from pouring out. These two aspects determine that the floor slab of the bathroom is lower than the outside, so the design should be lowered. >>>More
If the bathroom is too small, you can design the dry and wet separation of the washbasin outside, put the washbasin externally and place it outside the bathroom alone, and keep the toilet and shower room or bathtub in the bathroom, so that not only can the dry and wet partition be easily realized, but also because the washbasin position only occupies a small part of the common part, the aisle will not appear crowded. >>>More