-
Anonymous users2024-01-23There is no golden ratio, the larger the bathroom, the smaller the proportion of wet areas! For example, 3 square accounts for half, 5 square accounts for 2 square meters, 10 square meters up to 3 square is enough.
-
Anonymous users2024-01-22The dry area needs a basin of 800 (600 is not considered, since it is done dry and wet partitioning, it is usually a lot of people in the family, and there are not enough small things) The depth is 500 and the aisle is 800 The smallest area of the dry area should be multiplied.
Wet area It is best to leave enough for the bathing position to be 800 times 800 for the toilet 700 Counting the width of the dry area, the minimum for the wet area is to be multiplied.
If the partition wall is 12 walls, the area is multiplied by more than 3 square meters, which can meet the normal use.
The premise is that the strip toilet needs to be slightly larger.
If you need a washing machine, a laundry table, a mop pool or something like that.
It should be increased accordingly.
There are also plumbing conditions in the toilets, and so on.
Therefore, how can we be sure if we don't look at the actual situation.
1. The dry area is designed outside the bathroom.
Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More
1. The dry area is designed outside the bathroom.
Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More
The main thing about the dry and wet separation of the bathroom is to make a separate shower room, so that the water during the bath will not flow to the entire bathroom, and it is expected that the decoration trend of 08 will be more effective, and some fancy decorations and impractical functions will not be favored.
1. The dry area is designed outside the bathroom.
Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More
Three lights, one for dry, one for wet and one for wet and one floor light to observe the anti-slip condition of the ground.